Question about 1989 Chrysler Fifth Avenue

1 Answer

1989 chrysler 5th avenue - blows taillight fuse when headlights are turned on

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like you have a bad ground some were check the body to frame ground

Posted on Nov 17, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: 1993 Chrysler New Yorker 5th Ave No Head lights

hope our chat fixes

Posted on Oct 03, 2008

  • 2427 Answers

SOURCE: keep blowing fuses for the taillights when i turn

short in the wiring. More or less a positive wire is grounding on the body of the vehicle. you are going to have to trace it from the switch to the lights to see where the wire is broken, stripped , burnt or touching.

Posted on Feb 26, 2010

elshaddai159
  • 1016 Answers

SOURCE: where is the fuse located

Hi the fuse for the sunroof is fuse number 7 in the fuse box.
Hope this helps, let me know if you need more information.
Thanks
Jason

Posted on Oct 27, 2010

  • 878 Answers

SOURCE: my heater in my 1985 chrysler 5th avenue isnt

change out your thermostat

Posted on Mar 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 5th avenue, idling problem


Stalls While Braked or Braking and While Turning.

www.2carpros.com/.../1989-chrysler-5th-avenue-stalls-while-braked-bra...
Jan 9, 2012 - 1989 Chrysler 5th Avenue • 89,000 miles ... Check the idle air control motor, EGR and PCV valves-also check the ... The 318s used in the Fifth Ave were built to really tight tolerances compared to those used in trucks and vans. ... and using a cardboard gauge to see if the floats fall down to the proper setting.

Sep 08, 2015 | Cars & Trucks

1 Answer

Where is the location of a headlight relay on a 1993 Chrysler New Yorker 5th Avenue?


Called Headlight Timer Relay located Above Glove Box On Relay Module.

May 12, 2015 | Chrysler Cars & Trucks

1 Answer

1989 chevy k-1500 headlights taillights parkinglamps dome light and dash lights will not come on and not getting any power to the headlight switch. and have replaced headlight switch and relay and there's...


Usually the power feed to the headlight switch isn't fused. It will come from a fusible link under the hood. On the right side of the firewall there is a black plastic cover, under it are the fusible links. Check here for a possible blown one. I would also suspect the headlight switch may have originally caused it to blow if thats the case. If you have already replaced the headlight switch, replacing the fusible link should repair the lights. Make sure you replace the fusible link with the same gage wire and same length.

Feb 24, 2011 | 1989 Chevrolet S-10 Blazer

1 Answer

Just bought another 89 Park Avenue; headlights/taillights do not come on automatically when car is started----my other car does.


you should have two sliders one on each side of the manual turn on for lights and park lights. dont have both of those sliders pointed all the way up they have to be like one click under and they should work automatically for ya

Jan 03, 2011 | 1989 Buick Park Avenue

1 Answer

We have a 1989 Chrysler 5th Avenue, it is not starting. We have checked all the wiring and replaced the battery, the Timing chain, retimed the engine, regabbed the spark plugs, Nothing seems to want to...


your throwing all these parts at vehicle need to break it down --does vehicle turn over ---doest it turn over and no start --is it getting spark --is it getting fuel --with no spark need to test componants or adjust --with no fuel need to test fuel system fuel pump-filter etc

Jul 14, 2017 | 1989 Chrysler Fifth Avenue

1 Answer

Keep blowing fuses for the taillights when i turn on the headlights...everything else works, even the headlights..what could this be? a short in the wiring? bad headlight switch?


short in the wiring. More or less a positive wire is grounding on the body of the vehicle. you are going to have to trace it from the switch to the lights to see where the wire is broken, stripped , burnt or touching.

Feb 26, 2010 | 1994 Chrysler LeBaron

1 Answer

No taillights and headlights blow.


No taillights and the headligts blow the fuse when turn on would indicate that there is a wire failure with the tail lights and when the headlights, being on the same circuit, are turned on, the fuse blows because there is a short in the tail light wiring.
Good luck

Jan 10, 2010 | 2003 Kia Spectra

3 Answers

1989 Chrysler 5th ave, shuts off when idling, hard to start,


remove the gas tank sending unit and replace it with a new one or new filter end and your problem wiill be solved

Apr 16, 2009 | 1989 Chrysler Fifth Avenue

1 Answer

Have 2006 pt cruieser with no dash ortaillights also no parking l


check all the fuses in the fuse block for power on both sides....if none are blown its possible the fuse bank module itself is bad

Dec 14, 2008 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...