Question about 2002 Jaguar X-Type

1 Answer

Where is my knock sensor bank 2 located at on my jaguar x-type? (2002, 2.5 cylinder v6)

Posted by on

  • aluebke8604 Feb 20, 2012

    Where is it located? Said knock sensor bank 2.. At my local car quest it said there was 1 under the intake manifold an the other on the passenger side of the engine. Which one is the bank 2 sensor?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

There are two knock sensors located on top of the Engine, approximately in the middle of the 4 cylinders at each bank.
To get access to the sensors the black plastic engine cover with the "Jaguar V8" imprinted on has to be removed.

There are two types of knock sensors.
The "old" ones that are of a "screw-in barrel type" and the newer ones that are just bolted on.

I describe the replacement of the bolt-on type knock sensor on Bank 2 in the following documentation on a 1999 XJ8 AJ27 engine.

Be careful!
Knock sensors are piezo electric devices that are very sensitive! If dropped, over-torqued or struck they will probably be destroyed.
As knock sensors are sensitive to a sudden temperature change they are also easily fractured by steam blasting a hot engine.
So handle the knock sensors with great care and let the engine always cool before fitting a new sensor!

Posted on Feb 20, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: What is location of #2 cylinder on 2002 Jaguar X

The number 2 cylinder is in front of the car on the passenger side closest to the oil cap. The cylinders on the firewall side are the odd number, front of the car even number starting from the passenger side to drivers. Rear are 1,3,5 and front cylinders are 2,4,6. The firing order will simple be 123456. Let us know if we can be of further help.

Posted on Jan 05, 2011

  • 2 Answers

SOURCE: knock sensor location

It's under the intake manifold. To access it you have to remove the manifold and injection rail.

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: where and what is the knock sensor on a jaguar 3.0 x type any answers please

99 jaguar knock sensor location?

Posted on Sep 01, 2009

  • 1 Answer

SOURCE: How do you find and replace a 1rst bank knock sensor on a xk8

13mm socket in between intake tubes on right side of motor(pass side) very easy.

Posted on May 07, 2009

  • 133 Answers

SOURCE: Jaquar X Type Oxygen Sensor

two at the front on the exhaust cat and two on the rear, and yes if there tight

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Position of oxygen sensors


all you have to do is follow the exhaust from the manifold back and you will come to the sensors. bank 1 O2 sensor is on the bank cylinder 1 is and bank 2 O2 sensor is located on the bank cylinder 2 is on. the first sensors you come across is sensor 1 then the next sensor you come across sensor 2 and so on. so you can have a sensor code like bank 1 sensor 2 meaning the sensor on bank one but the sensor is the 2nd sensor in the exhaust.

Jun 25, 2015 | 2002 Mitsubishi Galant

1 Answer

How to replace p0420 and p0430 sensors


p0420 and p0430 are codes for bank a and bank b catalyst efficiency below threshold. there are 2 sensors on each bank. you dont say if its a v6 or a v8, if its a v6 they are easy to get at from the underside. one has a green connector the other blue, both sides the same, and screw into the exhaust one before cat one after, if its a v8 there not so easy. the connectors are at the back of the cylinder heads one grey one black. my advise would to get it on to some diagnostic equipment to monitor live data to identify the culprit, you dont get both sides going down together. from my experience with these cars if one bank of cylinders has a emission related problem the ecu uses the other bank to compensate which can confuse diagnostics. also one of or both catalysts may be faulty

Apr 21, 2015 | 2002 Jaguar S-Type

1 Answer

Chips bank 1 location


chips, cow chips?
whats a chips?

my guess is where are the oxygen sensors?
answer 1 front and 1 rear of CAT.
where is bank 1?
well that is the bank that contains cylinder 1/
no engine options stated, or DTC errors.
Bank1 i there
Sensor 2 is rear.

Jun 01, 2014 | 2002 Jaguar X-Type

1 Answer

P0 333 knock sensor where is located? banck 2,please send a picture


bank one is the left side if your standing in front of the car and facing the hood...and bank one is always where the 1st cylinder is located....so bank two is located on right...if your standing in front of the car..if its superchraged the knock sensor is located on the plenum of the black and has to be tightened 24 nm of torque or 32lbs ft. you will have to remove the supercharger and the throttle body and egr vavle etc...to get to it.And if you have a natural aspirated engine the its also one the plenum of the block about half way don the engine...if you need a pic of the location let me know...

Aug 28, 2011 | 2003 Jaguar S-Type

1 Answer

I have a 2004 54 plate jaguar x type 2.0 v6 fault code P0346 comes up on scan camshaft position sensor a- bank 2 need help to locate the sensor thank you to all that can help me


http://www.bluejag.co.uk/Jaguar-XType-Engine-2L-V6.php
I haven't finished this page yet so it's only a guide to location at the moment. location 5 and 6.

If you disconnect the sensor and check your error code you will be able to tell which is which (if you get a new code its the wrong bank).
It may pay to check your spark plugs in the bank concered, if the resistance of plug(s) go high this will also cause this fault

Aug 21, 2011 | 2003 Jaguar X-Type

1 Answer

WHERE IS THE CRANK SHAFT SENSOR LOCATED


The 2002 Santa Fe came with three (3) possible powertrains (engines). The 4 cylinder, and two different V6 engines - i.e. 2.4L 4 cylinder, the 2.7L V6 and the 3.5L V6.

The crankshaft position sensor on the 4 cylinder and the 3.5L V6 are in the same place - Front Crank Shaft behind the pully (behind the timing belt cover.

On the 2.7L V6, the Cranshaft Position Sensor is located in the engine block (Left Hand Side)
near the flywheel (adjacent to the LH (Bank 2) exhaust manifold.

Note: Left Hand Side means the radiator side (front) Bank 1 is the firewall side.

Jun 30, 2011 | 2002 Hyundai Santa Fe

1 Answer

Where is the rear "b2 s2" oxygen sensor located in a Jaguar 2003 xtype 2.5liter car? There are 4 oxygen sensors -- one in the front catalytic converter and one next to it by or in the exhaust manifold and...


Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Hope helps (remember to rate this).

Oct 06, 2010 | 2002 Jaguar X-Type

2 Answers

2002 chevy silverado hd2500 6.0 ecm code po332 low voltage knock sensor 2 bank 2 does this mean knock sensor is deffective causing ecm to throw this code and if so should both sensor be replace and which...


If all connections are good "dry, tight, no corrosion" then yes. It should be a defective sensor. These sensors are piezo sensors and create a voltage when sensing a knock. A bank refers to a side on a V style engine, 2 refers to the rear sensor on your bank 2. Bank 1 should be the side with cylinder #1 which should be the cylinder closest to you on one of the sides. So your looking for the rear sensor on the opposite side.

Jun 13, 2010 | 2002 Chevrolet Silverado 2500HD

2 Answers

Engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l


P0332 - Knock Sensor 2 Circuit Low Input (Bank 2)

This sensor signals the engine-control computer when detonation is detected, momentarily retarding ignition timing until detonation ceases.

Most computer-controlled systems use knock sensors to ****** timing when the engine is experiencing pinging or knocking.


Obviously, a faulty knock sensor produces problems that appear to be ignition-system-related. If the knock sensor system does not provide an engine detonation signal to the PCM (powertrain control module), the engine detonates, especially on acceleration.
  • The first step in diagnosing the knock sensor and knock sensor module is to check all the wires and connections in the system for loose connections, corroded terminals, and damage.
  • With the ignition switch on, be sure that 12 volts are being supplied through the fuse to the knock sensor module.
  • A quick check of a knock sensor is to watch the ignition's timing while the engine is running and the engine block is tapped with a hammer.
    • The noise should cause a change in timing.
  • The knock sensor can also be checked by tapping near the sensor and watching for an AC pulse on a DMM or lab scope.
16bb5a3.jpg

May 01, 2009 | 2002 Jaguar X-Type

2 Answers

Identify bank 1 cat


Viewed from the flywheel, the right-hand bank (i.e. next to the firewall) is Bank 1. Bank 2 is at the front of the car.

Feb 24, 2009 | 2002 Jaguar X-Type

Not finding what you are looking for?
2002 Jaguar X-Type Logo

1,851 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...