Question about Peugeot 206
My car has had new coil springs, spark plugs, power steering sensor and an idle control sensor and it still keeps cutting out, it does it when you slow down and some times does it when you turn the steering wheel........ any help would be much appreciated!!!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake
Posted on Jun 18, 2009
SOURCE: fuse box diagram peugeot 206
My car Lights all seem 2 b going slowly. dashboard went first and i keep changing the fuse for it and it will work for 3days or soo and then blow dont kno what the problem is? and then yday i fount out that my horn doesnt work now and my rear fog lights dont work, break, reverse and indecate still works... what could b the problem??
Posted on Feb 16, 2010
In my opinion cut off problem occurs if engine is not getting sufficient fuel and/or air. Clean the air filter, turbo filter and fuel filter. Check the continuity of diesel flow from filter to hdi pump. If you haven't found any problem there then the possibily the hdi pump and injectors section needs to be checked. If the car has done more than 100000 miles then clean inlet and outlet manifolds including check of turbo and EGR valve. Do everything whatever possible before you take your car to garage. If there is no luck then let your car diagnosed and check any error code recorded by ecu.
Posted on Oct 13, 2009
Tips for a great answer:
Jan 01, 2017 | Peugeot 206 Cars & Trucks
Nov 11, 2013 | Cars & Trucks
Dec 02, 2011 | Cars & Trucks
May 19, 2010 | Peugeot 405 Cars & Trucks
Jan 25, 2010 | 2006 Peugeot 604
648 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: