Question about 1997 Chevrolet K1500
The gear indicator light will only light up fo r-1-2-3 but it wont for P-N-OD anyhelp?
Either be a busted bulb and/or poor grounds.
check and replace busted bulb(s) and make the grounds better.
Posted on Feb 21, 2012
Light should not be on in D.
Posted on Feb 21, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 97 Chevy K-1500 wont start
One thing to check is fuel volume you can have press but not enough volume. also check for cranking vacuum you should have at least 3 to 5 in. hg or more . a engine has to have vacuum to crank. you can check it with a hand held gauge. if zero or close to zero this could be caused by clogged exhaust to a stuck open pcv to a leaking intake. does the motor turn over at the same speed it always has ? not faster or slower no noise ? check the plugs see if they are fouled, check to see if you have the intake with the spider in it? those go bad and no start spark fuel but no start. a bad egr you can use a hand held vacuum pump on it to check it. the egr on gm's can cause no starts. I hope I was able to give you some ideas of things to check.
Posted on Jun 11, 2009
You can remove the interlock off the gear shift or maybe spray some crc on it otherwise probably a loose wire or switch
Posted on Jul 10, 2009
with the info you have here it sounds like you have clucthes burnt , you will need to have it rebuilt , or replaced .
more info would be helpfull
Posted on Oct 02, 2009
Hi, Well those shift cables have a slight adjustment at the trans. When I replaced the cable on my 96 i had to adjust it slightly. But before you adjust it make sure that the cable is routed the same way that it came out, if the cable is kinked or bent in any place it can cause it to bind and not go all the way down. Hope that helps
Posted on Dec 09, 2010
Tips for a great answer:
Mar 03, 2015 | Dodge Cars & Trucks
Dec 17, 2013 | 2003 Chevrolet Silverado 1500
Apr 24, 2012 | 1996 Chevrolet K1500
Aug 18, 2017 | 1997 Ford Contour
Feb 16, 2010 | 1997 Dodge Ram 1500 Club Cab
Jan 15, 2010 | 1988 Chevrolet C1500
Jan 04, 2010 | 1997 Chevrolet Suburban
Nov 20, 2008 | 1989 GMC Sierra
89 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: