Question about 1996 Chevrolet S-10 Pickup

Open Question

My air compressor wont engage on my 1996 Chevy s10 truck? What do I need to do or does anyone know where I can get a manuel.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 124 Answers

SOURCE: chevy s10 4 wheel drive will not engage

There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.

Posted on Dec 08, 2008

Ad
dgjtex
  • 405 Answers

SOURCE: Heater wont work in my 1990 Chevy Truck

Several things can cause this (1) low coolant (2) bad coolant valve to heater core.(3) bad damper in duct.

Posted on Dec 27, 2008

  • 5 Answers

SOURCE: 1996 chevy s10 heater not blowing hot air

heater core or leak on cooling system

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: my 1996 chevy blazer a/c compressor doesn't engage

check fuse then relay, if both ok disconnect snap in wiring harness at the top of the accumulator tank and use a jumper wire . plug it into the end of wire harness turn a/c on to max if pump kicks on ,then its not the pump but switch that is screwed into the accumulator tank. ran into the same problem with my 97 blazer definetly a cheaper fix than pump also make sure a/c is discharger first before removing switch a/c is a pressurized system so you dont get hurt or worse frostbite

Posted on Jul 08, 2009

  • 34 Answers

SOURCE: 1987 s10 chevy truck 4x4 not engaging

if it is push button then it is electrical problem if it is level operated its mechanical. im pretty sure there would be no vacuum lines involved here.. i really cant help because your not telling me if it makes any noise when trying to engage or anything like that

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy S10 4x4 4.3 engine a/c compressor bolts


Hey Waynelee.. I would go to the local Chevy/GMC dealer and get the factory bolts..( and they usually offer some good advice when you tell them what you are trying to accomplish)...

Jun 16, 2017 | Cars & Trucks

1 Answer

1998 chevy s10 the ac will sometimes be cold at startup but then usually gets warm as engine gets warm


Is the AC compressor running when the air temperature starts to warms up?? I need to know if the large line from the AC compressor is getting cold, should be almost frosty?

Jun 17, 2016 | AC Cars & Trucks

1 Answer

Why wont clutch engage after installing new engine in 1996 chevy s10 2.2 ltr manual trans


Do you mean "disengage?" The slave cylinder may require bleeding.

As to why it might NOT engage, well that means the pressure plate may not be properly secured to the flywheel (you did tighten the bolts, right?) I don't believe you can get the thing together with the disk in backwards, but I'm not sure. I have a '98 2.2l and it trust that the mechanisms are the same. Mine has a hydraulic clutch master/slave and the slave is at the throw out bearing. Not sue fi you can put that in wrong to where it will depress the pressure plate in its rest position.

Hopefully you meant "disengage" and only need to bleed air from system!

Feb 11, 2015 | Cars & Trucks

1 Answer

99 S10 4 wheel drive wont engage


have you tried some of the chevy 4x4 forums. they have diagrams and many work on these vechiles. i have received good info from them before

Jan 30, 2015 | 2000 Tracrac Chevy S10 Pickup - 7 long bed...

1 Answer

I have 2002 Chevy s10 with ac issues. All blend doors and actuators work properly. Clutch engages on compressor. Blows warm air when ac is on. When I put a guage on it the psI stays on max and doesn't...


Yes. When you turn on the compressor via clutch Suction line pressures at around 3000 rpm should be around 30 PSI. If pressure stays high it is because the compressor is running but it is not doing squat and needs replacement - bad reed valves.

Sep 04, 2017 | Cars & Trucks

1 Answer

Location of ac relay 1996 S10


My Chevy S10 AC clutch is not engaging... new compressor and dryer and hoses...new relay fuse in engine compartment...could putting more freon in help it engage?

Apr 09, 2012 | 1996 Chevrolet S-10 Pickup

1 Answer

96 chevy blazer not blowing out cold air only 70 deg.freon full clutch engage and disengages


Have you checked the low side and high side pressures? The compressor might be bad. Does one line to the compressor get cold and the line coming out get hot?

Jul 02, 2010 | 1996 Chevrolet Blazer

2 Answers

1996 chevy blazer a/c wont blow cold air


you need about two or three mor little cans of freon.If you dont have enough in the system the compressor clutch will not engage( turn ) of course you know this is the street version,not professional.but it will do.

Jul 24, 2009 | 1996 Chevrolet Blazer

2 Answers

1996 Chevy Tahoe air conditioning not blowing cold air


That "thing" is part of the compressor clutch. When it’s spinning the clutch is engaged, when it stops the compressor is off. If it’s constantly cycling, you probably don’t have enough freon in the system. But remember, however the gas escaped before, it will escape again, unless you fix the leak.

Jul 14, 2009 | 1996 Chevrolet Tahoe

1 Answer

1996 chevy s10 heater not blowing hot air


heater core or leak on cooling system

Jan 06, 2009 | 1996 Chevrolet S-10 Pickup

Not finding what you are looking for?
1996 Chevrolet S-10 Pickup Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...