Question about 2011 Buick Enclave

Open Question

Removal of passenger side mirror 10 enclave

On my enclave, it appears that the triangle piece on the inside of the door behind the mirror is a part of a trim piece all around the window frame. Can this be pryed off without breaking something?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: remove inside door panel on 1995 lesabre

These are not too difficult to remove, you just need to know where the hidden fasteners are. The usual plastic clips hold the panel around the sides and bottom, and need to be gently pried up, ideally with the tool designed for this. At the back of the armrest there is a reflector, a sort of triangle shaped thing, which must be removed, by working a slim screwdriver in at the top, to push down on the clip that holds it. This clip is sort of sawtooth shaped, bends down when installed, and pops back up when in place. When it's out, you'll see a 10mm bolt which secures the door panel to a bracket on the door, looking straight in through the hole. Remove it. The power window switch assembly needs to be removed to access the other two of these lag bolts. There is a spring clip at the front of the switch, you need to work a tool (screwdriver or similar) GENTLY in between the front of the switch and the armrest, and push this clip backward. The front of the switch can be raised, and the switch slides forward and out.There are two bolts holding the panel to a bracket looking down through the opening. After that, it's just the usual clips. Good luck!

Posted on Dec 07, 2008

Ad
  • 4 Answers

SOURCE: 1999 Buick Century - passenger side power window does not work

Replace the Driver side window switch. These have a corrosion issue.

Posted on Apr 01, 2009

  • 1 Answer

SOURCE: I need to replace the 99 buick century side mirror

There is a small plastic piece (triangular shape) at the top of the door panel, opposite of the mirror. It is held in place by a plastic clip. You can gently pop that out, with a flat blade screwdriver or something similar. That will expose 3 bolts with nuts on them. On my 2000 Century, they are 10 mm. Take off those three nuts, and the mirror will come off.

Posted on Jul 19, 2009

  • 1986 Answers

SOURCE: how to remove passenger door panel on 97 lesabre

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror on

Posted on Sep 28, 2009

  • 1986 Answers

SOURCE: Replace passenger side electric mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace passenger side mirror motor on 2010 tahoe


You replace the entire assembly. The motors are behind the mirror itself. You remove the small triangle piece of trim on the inside (may be part of the entire door panel in which case the door panel must be removed) then remove the three nuts holding the mirror on and unplug the harness.

Oct 12, 2016 | Cars & Trucks

2 Answers

How do u get the side mirror off


Remove the side mirror from inside the door, behind actuall mirror. Remove plastic triangle trim and then 3 support screws. If your just replacing the mirror itself (if cracked) just see a glass shop, they can cut a new mirror and glue it onfor you. -very inexpensive....

Feb 24, 2011 | 1998 Chevrolet Cavalier

1 Answer

How to replace Inside Rear View Mirror on 2000


Hello, to replace the rear mirror, try the following:

1. Roll the passenger side door window all the way down. Turn off the ignition and remove the keys.


2. Gently pry the window control panel from the arm rest with the pry tool or screwdriver starting at the bottom of the panel. Flip it over and unplug all the wire harness outlets from it. Set the panel aside.

3. Locate and remove the two panel door plugs near the arm rest concealing the two screws and remove the screws with the Phillips head screwdriver.

4. Remove the door panel retainer plugs along the edge of the door by pressing in the middle of the plug to unlock it and removing the plug.


5. Detach the mounting triangle from the upper inside door panel covering the side-view mirror.

6. Remove the door panel by lifting outward and then upward. Disconnect the speaker wire harness from the underside of the door panel and set the door panel aside.

7. Locate and disconnect the mirror wire harness.

8. Pull back the foam insulation from the inside panel covering the side-view mirror.

9. Unscrew the three mounting nuts from the mirror using the ratchet, extension and a socket. Do not drop the nuts into the door cavity.

10. Pry the mirror gently away from the outside of the door.

11. Install the new mirror and replace the mounting nuts on the mirror studs and tighten with the ratchet, socket, and extension. Plug the mirror wire harness back in. Replace the foam insulation. Replace the mounting triangle.


12. Replace the door panel by reversing the procedure. Start by plugging in the speaker wire first.


Thanks
































Jul 26, 2010 | 2002 Pontiac Grand Prix

1 Answer

How do I remove the passenger side mirror to replace it?


on the inside of the door, pop off the triangle shaped piece of plastic trim with a trim tool or screwdriver. The screws that hold the mirror on are under this piece of plastic.

Jun 23, 2010 | 2003 Chevrolet Tahoe

2 Answers

How to replace passenger side mirror on 2007 Camry


To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.

Dec 04, 2009 | 2007 Toyota Camry

1 Answer

How do I remove the passenger side power mirror on 98 caravan?


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 28, 2009 | 1998 Dodge Grand Caravan

1 Answer

Passenger side mirror replacement procedures


If its a power mirror there is more thing you will have to remove to get to the wires but if not there is a screw on the corner piece on the inside of the door. just pull the screw out and the bolts (3) that hold the mirror on are behind it. If it power then you will have to remove the door panel to access the wiring to disconnect it

Jun 21, 2009 | Ford Taurus Cars & Trucks

1 Answer

Need instructions to install replacement side view mirrors for 95 chevy blazer


You will have to remove the door panel, behind the triangle piece on the top right of the drivers side door panel you will see 3 nuts which hold the mirror in place. Remove the nuts and the mirror should come right off the door. Same on the passenger side.

Jun 03, 2009 | 1995 Chevrolet Blazer

2 Answers

Replacing passenger side mirror


no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

May 28, 2009 | 2003 Nissan Xterra

1 Answer

Side mirrors


simple there are 3 nuts 8mm or 10 mm one the backside of those mirrors. sometimes ya just pop off the upper trim on the inside of the door. sometimes you have to remove the whole door panel and that little triangle piece to access the nuts.

Jun 27, 2008 | 1995 Dodge Ram 2500

Not finding what you are looking for?
2011 Buick Enclave Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...