Question about 2000 GMC Sierra

Open Question

2000 gmc sierria 1500 no brake fluid in rear

I get brake fluid to the front but none in rear and i have changed the rotors too. still no fluid 1is getting to the rear

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: 2000 gmc both rear tire oil leakage.

You are correct, it's not brake fluid. Check the level in your rear axle, it sounds like you have bad seals in the axles allowing the rear differential gear oil to leak inside the brake drums.
This is a heavy weight oil, 80 or 90 weight. This leakage will ruin your brake pads, and if enough leaks out, your rear differential will blow. The seals aren't expensive, but it's a lot of labor to pull everything apart to get at the seals, plus new rear brakes. My Ford ( and I'm sure your GMC) require removal of the rear axles to change the seals. Good Luck! countrycurt0

Posted on Sep 18, 2008

  • 1 Answer

SOURCE: 2002 GMC Sierra 1500 rear brakes

The first problem that I see is.....

You got screwed, the rear brake shoes and the parking brake shoes and the same thing. The parking brake uses your back brake pads to set the brake.


Sorry man

Posted on Oct 24, 2008

mick-40
  • 94 Answers

SOURCE: 2002 GMC Sierra 1500 rear brakes

Hi joelalthomas, if they replaced your brakes and you never even made it home they had better warranty the work and as for the "it was a common problem on 2002-2004 trucks" well check for Chevy recalls as this is a safety issue that would have been corrected at no expense to the vehicle owner, do a little more research my friend and let me know what happens, I will check around a little as well in the meantime I would find a new garage.Do not pay any more as you said your brakes worked fine until they worked on it good luck to you As for your 4x4 did you look at the left side when you did the right side? and were they bled off properly? you can visually check to see if the calipers are functioning

Posted on Nov 11, 2008

MrScary66613
  • 1990 Answers

SOURCE: Debree shields behind rear disc brake rotor rotted out.

Not hard to Replace. you will have to take the Caliper off of the Rotor and then Take the Rotor off, Repack the Bearings! And it is Right There!

Posted on Jan 18, 2009

  • 14036 Answers

SOURCE: 1999 GMC Jimmy Rear Brakes

where do you live meaning if you live on mountain or driving down steep incline every day you will ride brakes every day.that will wear on them a lot.use manual low1 gear coming down mountain.also buy a good brand brakes .i learned a long time ago if you pay more .it will last more.longer.

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tools do i need to change brake pads on 2005 yukon xl


Jack, wheel wrench, socket set, large screw driver, pair of pliers or grips. Lithium grease for the pins. Watch all of these videos. .spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

    How To Install Replace Front Brake Pads 2000-06 Chevy ...

    9k=? 4:46 https://www.youtube.com/watch?v=nPohZtD8zlA May 27, 2014 - Uploaded by 1A Auto Parts http://www.1aauto.com/brake-pads/i/1abps00080 1A Auto shows you how to ... Front Brake Pads 2000-06 ...

    HOW TO INSTALL REPLACE GMC YUKON DENALI ...

    z? 14:10 https://www.youtube.com/watch?v=um7dt_yvZ1s Sep 20, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon Denali. Changing these parts ...

    How to REPLACE INSTALL BRAKES and ROTORS GMC ...

    2q==? 11:32 https://www.youtube.com/watch?v=UWqows3P4DE Feb 11, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon. Changing these parts ... Would ...

    GMC Denali Brake Pads Removal and Installation - YouTube

    z? 3:45 https://www.youtube.com/watch?v=uEKs8nphVxU Oct 24, 2012 - Uploaded by AnotherLookFilms Remove and Install rear brake pads on your 2006 GMC Denali XL. ... 9-21-13 2007 GMC Yukon rear brakes ...

    GMC Yukon Denali Front Disc Brake Pad Replacement ...

    2q==? 8:21 https://www.youtube.com/watch?v=w_gn_l5lYkw Jun 20, 2013 - Uploaded by AMS Automotive Watch the proper procedure for replacing front disc brake pads. Featured vehicle: 2007 GMC Yukon Denali ...





Jan 22, 2016 | Cars & Trucks

1 Answer

Need to replace brakes on 2000 GMC Safari. does it have disc brakes all around or drum rakse in rear?


Disc brakes in the front and drum brakes in the rear. Make sure that you repack the front bearing's with wheel grease before finishing the job.If the front rotors and or the rear drums have a rough brake pad surface,get them resurfaced before installing new brake pads or brake shoes in the rear. you can go online or your public library for complete instructions on how to replace the brakes on that vehicle.

Apr 01, 2011 | 2000 GMC Safari

2 Answers

I have re/re the rear brake cylinders,shoes,drums,front rotors,pads,and callipers on my 2000 gmc safari van.i have bled all the brakes. but the drivers front has no pressure or fluid.the other three brakes...


make sure you are bleeding them by doing them as an abs system,do the right rear then the left front,then the left rear then the right front,the opposite wheels are how the system brakes.

Jan 21, 2010 | 2000 GMC Safari

3 Answers

Replaceing rotors


No, only if you change the caliper.

Oct 05, 2009 | 2000 GMC Sierra

2 Answers

Brake pedal vibrates while braking and doesent stop right away


There's speed sensors at each wheel. You may have got some contamination in front of one of them... sounds like the abs is trying to compensate for un equal speed at each wheel... and something may be blocking a proper read at one of the wheels...

Jul 23, 2009 | 2002 GMC Sierra 1500

2 Answers

Remove front Brake Rotor


Try opening up the caliper with a flat screwdriver thru the opening in the middle of the housing.pry on the rotor and pull towards you to push the rotor back.That should loosen it up enough for you to get it of the rotor.If that dont work you probably got a stuck caliper and have to release the brake line and do the procedure again. GOOD LUCK

May 09, 2009 | 2000 GMC Sierra 3500

1 Answer

2000 chevy 1500 silverado- rear brakes overheating


Have someone push & release pedal while at wheel with problem. See if it takes a while or slow to release. If yes, have wrench ready on bleeder screw, and try again, if it sticks/holds, crack bleeder screw, if it releases, I'd replace hose.

Jan 18, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

Debree shields behind rear disc brake rotor rotted out.


Not hard to Replace. you will have to take the Caliper off of the Rotor and then Take the Rotor off, Repack the Bearings! And it is Right There!

Jan 18, 2009 | 2000 GMC New Sierra 1500

1 Answer

2000 gmc both rear tire oil leakage.


You are correct, it's not brake fluid. Check the level in your rear axle, it sounds like you have bad seals in the axles allowing the rear differential gear oil to leak inside the brake drums.
This is a heavy weight oil, 80 or 90 weight. This leakage will ruin your brake pads, and if enough leaks out, your rear differential will blow. The seals aren't expensive, but it's a lot of labor to pull everything apart to get at the seals, plus new rear brakes. My Ford ( and I'm sure your GMC) require removal of the rear axles to change the seals. Good Luck! countrycurt0

Sep 17, 2008 | 2000 GMC Sierra

1 Answer

The brake light on the dash stays on i have replaced the rear brake shoes wheel cylinders and drums master cylinder front pads caliper and rotor on my 1988 gmc 1500 pick up the light will not go out


There is a level switch in the master cylinder if the fluid level is low it will turn on the light and If you pressure or vacuum bleed the brakes you will center the proporting valve switch that warns of low brake pressure in either Front or rear.
Vacuum bleeding I have found to work the best.
Make sure the Park brake lever is all the way released. If you find this informationn helpful please leave me a favorable rating and by all means contact me if I can be of any further help.
www.aceautomotive1.com

Aug 10, 2008 | GMC C1500 Cars & Trucks

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...