Question about 1995 Oldsmobile 88

Open Question

Bleeding abs block on 1995 oldsmobile 88 royal

I have replaced the master cylinder on my 1995 olds 88 royal. then noticed all the lines were bad, so replaced those. now i am stuck cause i have no clue how to bleed the system. i did try and bleed the master cylinder with the little platic nipples and the hoses, but not sure i did that right either. it does have an abs valve block with 2 lines going in from master cylinder, 4 lines going out to wheels. all 4 lines going out have been replaced. NOT the 2 going in. but the master cylinder was.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 299 Answers

SOURCE: Master Cylinder replacement on 1995 Oldsmobile 88

Start with right rear then left rear,then right front then lft front,Would rebleed at master cylinder 1st.

Posted on Jun 18, 2009

timsauto123
  • 750 Answers

SOURCE: Im about to put new

you don't have to bleed the brakes if your just replacing pads,only time you have to bleed them is if you open system.











TIM.....

Posted on Oct 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs brake system


Best case scenario bad vacuum pressure to the brake booster. Worst case bad abs control module or valve body/motor the abs system works by add and removing hydraulic pressure through valves and electric motor. Try using block off plugs at the master cylinder( remove lines plug outlets at master cylinder) check if brake pedal position and pressure is good(if there is no change problem is master cylinder or brake booster/ vacuum) if plugging at master cylinder solved issue repeat procedure at abs valve body after reinstalling lines from master cylinder if your problem returns your issue is in the abs valve body if plugging at the abs solves problem reconnect at the valve body bleed each line one by one testing between each line until you find the problem

Apr 11, 2014 | Hyundai Cars & Trucks

1 Answer

Free online chilton manual


Its possible it could be the master cylinder itself, It should always push fluid. Does the car have ABS? It could also be inside the ABS module if it does. I am familiar with brake systems and diagnostics, just not familiar with this year olds whether it has abs or not.

Apr 04, 2014 | 1992 Oldsmobile Cutlass Supreme

1 Answer

No pressure on brake pedal 95 suburban 2500 4x4 7.4L


try bleeding your ABS block first, if that doesn not work could need a master or proportioning vavle. Some scan tools are capable of bleeding the ABS system on some vehicles, and some you have to bleed manually.

Apr 07, 2012 | 1995 Chevrolet Suburban

1 Answer

No fluid at rear brakes on 1995 Olds Cutlass Supreme. I took it into a shop and the code said ABS motor was bad. Would be the cause of no brake fluid coming out when I take banjo fitting off?


Hello
The ABS in this car is what is called Active ABS, so yes a defective ABS Hydraulic control unit motor can cause this problem. Other things that can cause the problem is a defective brake master cylinder or Air trapped in the ABS control unit. You do not say you have done any parts replacement. If this problem did start after any brake system repair then be advised it takes a special tool that electrically holds open the ABS control valves so the air can be removed through bleeding, so if you opened yup the system you must have a shop with the proper tool do the bleeding. There is no way to bleed the brakes at home using conventional brake bleeding means.

Oct 06, 2011 | 1995 Oldsmobile Cutlass Supreme

1 Answer

How do you bleed the brakes on a 1993 olds delta 88 royal


Open all bleeders
Pour brake fluid in the master cylinder
wait until all bleeders drip
Close right rear bleeder
Close left rear bleeder
Close right front bleeder
Close left front bleeder

Mar 10, 2010 | 1988 Oldsmobile Delta 88

1 Answer

My back brakes on my 2000 Olds Alero are not working. The calipers are not pressing together against the rotor. Help! And a mechanic that I saw said that since he doesn't know if its the master cylinder or...


easiest way to start to diagnose ur problem would be to bleed lines-start with the furthest passenger side rear have someone help and pump up brake pedal -[observe brake to see if caliper moves if no start bleeding] and hold while u open bleeder if no pressure and caliper not moving follow the brake line and try bleeding at connections -regulator,abs,master cylinder till u get fluid to bleed out--if u let the master cylinder get to low before u did ur brake job then bleed that first and then work ur way from back to front -the connection or component where u get fluid and there is none after should be repaired or replaced sometimes debris [rubber metal filing] get in line and blocks valves

Feb 22, 2010 | 2000 Oldsmobile Alero

1 Answer

Master Cylinder replacement on 1995 Oldsmobile 88


Start with right rear then left rear,then right front then lft front,Would rebleed at master cylinder 1st.

Jun 18, 2009 | 1995 Oldsmobile Eighty Eight

2 Answers

Sometimes brakes goes to the floor .


if you suddenly loose brakes like that it usually an air block in main pipes, or badly overheated fluid, either way you will have to replace all fluid out of system by bleeding one at a time.

Feb 24, 2009 | 1989 Oldsmobile Delta 88

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...