Question about Volvo S80

Open Question

What does volvo S80 engine code P2407 mean?

I'm getting a P2407 engine code and I've already changed the gas cap out and the check engine light still comes one. I've looked at several blogs and they mention the evap canister solenoid as a potential problem. Where is this located on my car? I

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 275 Answers

SOURCE: 2004 Pontiac Grand Prix Evaporative Canister

you should be able to fix it look for a can near the fuel tank that has vacuum hoses coming out of it and you should be able to just buy the bad solenoid

Posted on Nov 03, 2008

  • 37 Answers

SOURCE: HAVE A TROUBLESHOOTING MESSAGE PO446

DTC P0446 Evaporative Emission (EVAP) Vent System Performance

The vehicle control module (VCM) monitors the performance of the evaporative emission (EVAP) system by applying a predetermined level of vacuum to the EVAP system and monitors the vacuum decay rate. The VCM sets this diagnostic trouble code (DTC) if the vacuum decay rate is more than a predetermined value. The VCM monitors the amount of vacuum and the amount of pressure in the EVAP system by monitoring the fuel tank pressure sensor. For this DTC, the VCM turns ON both the EVAP purge valve and the EVAP vent valve when the Conditions for Running the DTC are met. This applies an engine vacuum to a closed EVAP system. The VCM turns OFF both the EVAP purge valve and the EVAP vent valve when the system reaches a correct amount of vacuum. The EVAP system should quickly RELEASE the vacuum in the EVAP system with the EVAP purge valve OFF and the EVAP vent valve OFF (open). This test indicates a blocked or restricted EVAP vent path if the EVAP system fails to release the vacuum quickly enough.

3208f98.gif


Posted on Dec 06, 2008

GM Elec
  • 1000 Answers

SOURCE: location of evap on chevorlet silverado

Did Auto Zone scan your truck codes? If so, what were the codes. If not, ask them to scan the truck.
If there is an EVAP issue, a code will be set.
Let me know.
Regards,

Posted on Apr 09, 2009

junmag
  • 175 Answers

SOURCE: code p0455 (evap emission cntrl systm) gross leak detected

po455 could actually be a loose or deffective gas cap

Posted on Jun 02, 2009

MNfisherman
  • 11896 Answers

SOURCE: replacing the evap canister

It is the big black box on driver side front next to fender. It has to vacuum hoses going to it.

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can a lose gas cap cause the engine light to come on on a 2009 280 volvo


Answer to this is YES. Replace cap with about 3 clicks this is enough. If your check engine light is on the cars computer wil erase after a few miles. GOOD LUCK FRIEND.

Nov 12, 2014 | 2009 Volvo S80

1 Answer

CHECK ENGINE CODE P2407


Go to any advanced or discount auto and they will tell you what the code is dont know your model or what you have,You can even go to ask.com.Hope this helps

Oct 25, 2012 | 2002 Volvo S80

1 Answer

Checking 1993 Volvo 940 flywheel


check your codes first as it can be a number of things.

Oct 28, 2011 | 1994 Volvo 940

2 Answers

The "check engine" panel light indicator came on


It is a EVAP system leak
Detect pump sens CKT
Intermittant

First thing to try is to replace the gas cap.
Then the evap canister solenoid or the hose that goes to it.

Dec 03, 2010 | Volvo XC90 Cars & Trucks

2 Answers

My volvo s80 will not start and when it does the engine shakes and then it dies out, it says "Reduced Engine Power" what can that be?


Have the timing checked if you can get it runing for a few minutes. If not I would have the computers codes checked if possible. It sounds like a timing problem

Apr 09, 2010 | 2003 Volvo S80

1 Answer

I have a 2000 volvo s80 t6 and have fault codes 1171 & 1181. What does that mean?


I think that you have a contaminated or bad Mass Air Flow (MAF) sensor. It's located by the engine air filter housing. You can get a used one online for less then 100.

Aug 11, 2009 | 2000 Volvo S80

1 Answer

Check Engine Light On Volvo S80 2000


The P1132 I believe is a bad mass flow sensor or a vaccum leak

Dec 16, 2008 | 2000 Volvo S80

1 Answer

Check Engine Light On Volvo S80 Turbo


The P1132 I believe is a bad mass flow sensor or a vaccum leak.

Dec 16, 2008 | 2000 Volvo S80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...