Question about 2005 Nissan X Trail

Open Question

Diagram on how to install a clutch on a nissan x trail 52 plate

Installing clutch

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 88 Answers

SOURCE: instal diagram for nissan xterra grill gaurd

they jusy bolt to bomper brackets and where bumper bolts to bracket hey vote for me ok

Posted on May 26, 2009

Ad
redds55
  • 2620 Answers

SOURCE: Nissan frontier starter binds the flywheel

You need to put shims in between the starter and the engine block.You should be able to pick them up at your local auto parts store.

Posted on Nov 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camshafts install 2002 nissan altima 2.5s want them to go in right just wanna make sure before installing them thanks


download the pdf from this site
www.pdfsdocument.com/nissan-x-trail-engine-diagram.pdf

Aug 01, 2016 | 2002 Nissan Altima

2 Answers

On a 04 Nissan Frontier I replaced the clutch. After several months shaking really bad when I let out on the clutch in first gear. It never does it when cold only after driven awhile.


clutch shudder is from hot spots on the flywheel ,hot spots/warped pressure plate, oil on the flywheel face /pressure plate face, faulty engine mounts. many people think that it is just a matter of replacing the clutch plate but this always results in a poor performing clutch
Installing a clutch kit without first removing the protective coating on the pressure plate is a problem as well
Incorrect tightening sequence of the pressure plate bolts will cause a deformed pressure plate cover resulting in clutch engagement problems
If you have a cable clutch then that is made worse by bad engine mounts. Remember what you did and what you should have done and you will have the answer as to why it is shuddering on take off.

Feb 07, 2015 | 2004 Nissan Frontier

1 Answer

Nissan frontier starter binds the flywheel


You need to put shims in between the starter and the engine block.You should be able to pick them up at your local auto parts store.

Oct 31, 2012 | Nissan Frontier Cars & Trucks

2 Answers

Clutch only lasting 5000- 8000 miles been replaced twice on warranty original clutch was good for 68000miles what could be problem? citroen saxo had car from new 52 plate 1.4i not driven any differently


Are they replacing/resurfacing your pressure plate when they replace the clutch. Is it possible you have an oil leak that is causeing the clutch to slip?

Dec 08, 2010 | 2005 Peugeot 405

2 Answers

Parking brake cable stretched beyond adjustment how do you replace


Rear Brake Shoes- You'll need to know how to remove the rear brake shoes to remove the parking brake cable. REMOVAL AND INSTALLATION Amigo and Rodeo
  1. Raise and safely support the vehicle.
  2. Remove the rear wheels.
  3. Remove the brake drums.
  4. Remove the brake return springs.
  5. Remove the leading shoe holding pin and spring, and then the leading shoe.
  6. Remove the self-adjuster and the adjuster lever.
  7. Remove the trailing shoe holding pin and spring.
  8. Disconnect the parking brake cable from the trailing shoe and remove the trailing shoe. Remove the parking brake lever from the trailing shoe. To install:
  9. Attach the parking brake lever to the trailing shoe.
  10. Connect the parking brake cable to the parking brake lever.
  11. Apply a thin coat of high temperature grease to the shoe contact points on the brake backing plate (locations A and C in the accompanying illustration), piston contact surface (B), and self-adjuster (D). Fig. 1: Exploded view of the rear drum brakes — Amigo and Rodeo 93026g56.gif

  12. Position the trailing shoe on the backing plate and install the hold-down pin, spring, and retainer. Don't stretch the return spring when fitting the shoes onto the backing plate.
  13. Connect the upper return spring and the leading shoe to the trailing shoe and position the leading brake shoe on the backing plate.
  14. Install the adjuster assembly and the hold-down pin, spring, and retainer.
  15. Use a brake spring tool to install the lower return spring.
  16. Install the self-adjuster lever and adjuster spring.
  17. Adjust the shoe-to-drum clearance to 0.0098–0.0157 in. (0.25–0.40mm) and install the brake drum.
  18. Check the brake drum for scoring or other wear. Machine or replace as necessary. Check the maximum brake drum diameter specification when machining.
  19. Install the rear wheels. Lower the vehicle.
  20. Road-test the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1997 Isuzu Rodeo

1 Answer

How to replace a clutch in a 95 nissan pickup


hELLO remove your transmission from your truck and unplug all lines and electric wire from it and you will see your pusher plate removed all bolts on the pusher plate and remove the plate and the clutch disc also remove the flywell from the engine and get it refaced from the brake shop and also install a new clutch bearing at the same time,you will have to center your clutch disc when you will install the clutch the way to do it is you put the disc and the pusher plate togeter you install the bolt on the pusher plate snog by hand but dont tight it at this time put the centering toll trought the hole in pusher plate and the disc and center the disc and tight the bolts on the pusher plate at this time and remove the toll(if you remove the flywell those bolts have a torque on it be sure to torque the bolts at the right torque for it refer to a mecanic for it and reinstal your transmission.

Mar 08, 2010 | 1995 Nissan Pickup

2 Answers

I need to bleed my clutch in my 89 nissan pickup


if you have just instaled a new clutch you need to make sure the clutch disk has not ben instaled back wards and all the bolts holding the pressure plate are torqued evenly if eather is not corect the slave cyl will extend but not relace the clutch, if you have some one step on the clutch and it moves 1 to 2 in the problem is in the pressure plate or clutch disk,

Jul 06, 2009 | 1987 Nissan 300ZX

1 Answer

Wanting to replace the clutch because it is slipping.


Hope this helps. Best of luck to you!
Greg

Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative battery cable.
  3. Remove the transaxle.
  4. Gradually loosen the clutch pressure plate bolts, in a crisscross pattern. Support the pressure plate and remove the bolts. Remove the pressure plate and clutch disc.
  5. Inspect the pilot bearing. If it is worn or damaged and does not turn easily by hand, remove it using a puller/slide hammer.
  6. Check the flywheel surface for scoring, cracks or burning and machine or replace, as necessary.
  7. Install a flywheel holder to keep the flywheel from turning. Loosen the flywheel bolts evenly and gradually in a crisscross pattern. Remove the flywheel.
  8. Inspect the clutch release bearing for wear. Replace it if it sticks or does not turn easily.
  9. Inspect the release fork for wear or damage and replace as necessary.
To install: 7923kg32.gif Structural view of the hydraulic clutch system
7923kg33.gif Exploded view of the clutch assembly
Click to Enlarge
7923kg34.gif Flywheel tightening sequence
7923kg35.gif Pressure plate tightening sequence

  1. Lubricate the release fork fingers and pivot with molybdenum grease and install in the release fork boot.
  2. Install the clutch release bearing on the release fork.
  3. Install a new pilot bearing in the flywheel, if removed.
  4. Be sure the flywheel mounting surface and the crankshaft or eccentric shaft mounting surfaces are clean. Remove any old sealant from the flywheel bolt hole threads and the flywheel bolts.
  5. Install the flywheel.
  6. Apply sealant to the flywheel bolt threads and install them hand-tight. Install the flywheel holding tool. Tighten the bolts, in a crisscross pattern, to 71–76 ft. lbs. (96–103 Nm).
  7. Apply a small amount of molybdenum grease to the clutch disc splines and install the clutch disc on the flywheel, spring side toward the transaxle. Install a suitable alignment tool in the pilot bearing to position the clutch disc.
  8. Install the clutch pressure plate, aligning the dowel holes with the flywheel dowels.
  9. Install the pressure plate bolts and gradually tighten, in a crisscross pattern to 20 ft. lbs. (26 Nm). Remove the alignment tool.
  10. Install the transaxle.

May 20, 2009 | 2004 Kia Rio

Not finding what you are looking for?
2005 Nissan X Trail Logo

Related Topics:

1,012 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...