Question about Cars & Trucks

1 Answer

My 2000 chevy s10 pickup won't start it acts like it wants to but wont

Idrove to work it ran fine there i parked and when i came out it just keep turning over and acted like it wanted to start but will not i changed gas ,and fuel filter and fuelo pump and its doing the same thing i spray starting fliud in it and it fires i put it on a scanner no codes are popping up wires are not wet i pulled a plug to see if i flooded it and the plug was dry like it was not getting gas to it please heip

Posted by on

  • Joe Clark
    Joe Clark Mar 15, 2012

    Check to see if your ignition module is allowing what is called a 2 second fuel run .This can be done with a Noid light or just listening to the fuel pump to run for 2 seconds . If there is no noise check fuses under the hood and relays . replace Ignition module if there is no 2 second run and relays & Fuses are good . Good Luck .

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 12,104 Answers

Scanned wont pick up failed fuel pump--or clogged fuel filter check and test wiring --relays--connections and fuses

Posted on Jul 16, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 239 Answers

SOURCE: help

Sounds like it needs a new fuel pump. Get a Fuel Pressure Gauge and check it make sure it up to the Specs,What I think is about 35 to 40 psi without looking in my book. Also you would want to make sure the fuel filter was changed, Your getting spark and fuel, But You stated your able to start it with starting fluid so I would say it must be a fuel pump problem.. I hope that help you out. If not get back to me and we can try some more trouble shooting. Take Care, Bear

Posted on Jun 15, 2008

  • 109 Answers

SOURCE: Where is Audi 90 fuel filter?

Is the gas tank still low on fuel?

Posted on Nov 19, 2008

philriden
  • 146 Answers

SOURCE: 1994 blazer possible flooding

Sounds like you need to take it in for a computer diagnostic. Check your fuel pressure and fuel volume.

Posted on Jan 21, 2009

  • 41 Answers

SOURCE: anifreeze spraying out of my engine on drivers side

It has to be one of four things:

1. burst hose on radiator
2. hole in radiator
3. bad water pump
4. blown head gasket
You should be able to visually identify these by looking under the hood while the engine is running. If it is a water pump you should have heard a screeching sound prior to symptoms. If blown head gasket there will be water in your oil. Drain a little oil and see if it is creamy colored rather than black. If no antifreeze, you may see water floating on the oil.

PS- I thought of something else, it could be your radiator cap. When they go bad they let water escape.If it is spraying from behind your engine, it could be a heater hose burst. Oh yeah, if it is overheating before spraying it could be your thermostat.

Good luck,
bob

Posted on May 28, 2009

  • 691 Answers

SOURCE: 96 tacoma, ran fine, parked it and now it won,t

are you sure you getting fuel even though you have new fuel filter, check all fuses under the dash to fuel pump and relay under the hood, are you getting sparks? check rotor, cap, coil...make sure you getting 2 important items, gas and fuel to the engine. hope that help some

Posted on Jul 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 S10 4 wheel drive wont engage


have you tried some of the chevy 4x4 forums. they have diagrams and many work on these vechiles. i have received good info from them before

Jan 30, 2015 | 2000 Tracrac Chevy S10 Pickup - 7 long bed...

1 Answer

I have changed the fuel pump, fuel filter, rotor on a 1997 chevy s10 truck and still it won't start. we checked for spark and there is spark. we are now checking the fuel relay but don't know


you need 3 things, air, fuel, and spark. if u have spark coming from all plugs, then ur good there, if you have fuel, and it still wont start, it may be the maf sensor or one of the other airflow sensors such as the map sensor.

Mar 10, 2013 | 1997 Chevrolet S-10 Pickup

1 Answer

My 1990 Chevy s10 pk fuel injector won't work


There should be a fuse for the injector circuit. Did you check that?

Dec 27, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

"2003 Chevy Impala won't start". Car would not


The alternator is not charging,or the battery wont take a charge.If all accessories work fine when its running after you've boosted it,its likely the battery.
John

Sep 05, 2011 | 2003 Chevrolet Impala

2 Answers

1998 chevy s10 driving along and engine shut down.after sitting 10 min.it started but was rough.went 100.ft and it shut off again.sat for a while.it started and ran a couple miles like nothing was ever...


if it shuts off while driving and will not start back up for at least 10 minutes, then it may be the crank sensor doing this. is check engine light on! if so get it scanned to find problem code. if no scanner, auto-zone will scan for free. if light is on. CPS symtoms are: car dies and won't re-start till it cools down, or won't start at all. good-day ! crank sensor timing will be out of sync. it controls timing and sends info to pcm.

Jul 19, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

My 2000 chevy S10 wont start I changed the battery and it ran fine for 2 days now it will turn over but won't start


Check Fuel Pressure. First turn key to on position (without starting) and listen for the fuel pump motor. If no motor sound, your fuel pump is not working. Check fuel pump fuse and relay. If fuel pump works, check for pressure at the fuel rail (schrader valve on fuel rail for pressure testing). If no pressure, or not enough, fuel filter might be clogged or fuel pressure regulator may not be working properly. IF fuel is not the problem, start checking electrical, such as ignition control and proper spark to plugs.

Aug 14, 2010 | 2000 Chevrolet S-10

1 Answer

1988 Chevy S10 Durango Pickup, Won't start will fire


sounds like ignition module inside of distributor cap under distributor rotor button.these do go bad and can easily be replaced.strong suspicion from your details that this is the culprit.

May 09, 2009 | 1988 Chevrolet S-10

1 Answer

1991 chevy s10 pickup won't shift into park


Has anyone tried lubricating & or adjusting linkages/cable?

Nov 30, 2008 | 1993 Chevrolet S-10 Blazer

5 Answers

2000 chevy silverado 1500 4.3 eng


Chevy Trucks, Blazers, S10 pickup and the like will vapor lock ecspecially the 2000 models. Do not tighten the gas cap past 1 click. There is a tube that runs from the top of the tank down and this gets hot and collapses or burns in half. We just bought a reinforced rubber tube cut it to lengh and use it instead of part and it's worked grat for 2 years so far.

Jul 21, 2008 | 2000 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...