Question about Cars & Trucks
If it is a auto transmission the reverse switch is part of the larger switch called the neutral safety switch on the side of the transmission.
Posted on Feb 20, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
two first things to check fuel and spark ...fuel make sure your fuel pump is working its messy but the easiest way is to pull the fuel line "only one connection" and turn key to on then press gas pedal and gas should pump out if not fuel pump is bad... if thats not it you want to check for spark easiest way is to pull one of the spark plug wires and stick a screwdriver in the end then hold the screwdriver to where the metal shank is approx. 1/4" away from any metal surface ... hold the screwdriver without touching the metal shank!!! have someone crank the engine you should see a spark intermittently between the screwdriver and the metal youre holding it close to.. if thats ok the only other thing i can suggest is get a battery with more cca "cold cranking amps"..hope this helps..OH YA ON A SAFER NOTE!!!...DONT LOOK FOR SPARK WITH THE ENGINE WET WITH FUEL..
Posted on Sep 19, 2008
I am not 100% sure on toyota but most ignition switches you must remove the housing around the steering wheel to get to it . Its usually a large plastic componet on the left side behind the turn signal handle . It is always best to go to the local auto parts store and buy a haynes repair manual before attempting any repairs. Hope evereything turns out well for you !!
Posted on Dec 09, 2008
1°00’ ± 45'
3°00’ ± 1°
Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.
(0.08 ± 0.08 in.
This is the only Land Cruiser Specs I could find, hope it helps
Posted on Apr 18, 2009
hi my 79 series does the same thing when the water trap is full in the fuel filter it is easily fixed by loosening the tap at the bottom of the filter housing then pumping the little black nob on top of the housing its about the size of a 10 cent piece this pumps the water out pump until 100% fuel come out then tighten the tap back up hope this helps regards reis
Posted on Apr 29, 2010
Tips for a great answer:
Dec 28, 2016 | Cars & Trucks
Dec 14, 2015 | Holden Cars & Trucks
Feb 07, 2015 | Toyota Cars & Trucks
Apr 14, 2014 | 1971 Toyota Landcruiser
Aug 20, 2013 | Toyota LandCruiser Cars & Trucks
Nov 07, 2010 | 1997 Toyota Land Cruiser
Sep 19, 2008 | 2001 Toyota Land Cruiser
143 people viewed this question
Usually answered in minutes!