Question about Cars & Trucks
Makes a **** awfull noise when i press the clutch!
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Clutch release bearing removal
You have the transmission out and are trying to remove it from the slave cylinder right? Just pull straight out. It should pop free. It just has plastic tabs that hold it on.
Posted on May 30, 2009
Hello mpolci...The 2003 Tiburon was sold to the public with a defective clutch, it failed due to warpage and bad pressure plate... among other things. There are MANY class action lawsuits. Did you resurface or replace the flywheel when the clutch was replaced? Did you go with an aftermarket clutch kit, or factory? Also the slave cylinder on the 03 was known to have a defective valve.
You can try checking the levels and bleeding the system and if you still have problems, then it could be a release bearing, a loose clutch pad, or a broken pressure plate spring....If the clutch is still under warranty, i would return it to the installer.
Good luck, i hope this helps...please rate me a fixya.
Posted on Aug 01, 2009
did you try the spare key? are you sure it is an immobilizer light? what does the warning light look like, can you describe it? replacing the battery in the key will not help as it is not needed for the recognition of the key(this is done by an induced current).
Posted on Mar 05, 2010
Tips for a great answer:
Aug 17, 2016 | Cars & Trucks
Sep 29, 2015 | 1999 Peugeot 406
Dec 11, 2012 | Cars & Trucks
Oct 31, 2009 | 2005 Peugeot 405
Sep 14, 2009 | Peugeot 405 Cars & Trucks
Jul 11, 2009 | 1991 Peugeot 405
Mar 18, 2009 | 1991 Peugeot 405
Oct 05, 2008 | 2005 Peugeot 405
259 people viewed this question
Usually answered in minutes!