Question about 1999 Chrysler 300M
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: AC belt on 1999 Chrysler 300M
First off you have one of these possibilities for belt routing .. but basically you need to relieve pressure on the tensioner pulley then slip the belt off and do the same with new
Posted on Mar 22, 2009
i have the same car and it did the same thing when i got it take it to a dealership there are 2 flashes for the bcm body control module that will recalibrate the automatic temp contol and that should fix the problem
Posted on Apr 01, 2009
Manual Programming Procedure (non scan tool)
1. Connect pin 1 of the 16-way data link connector to chassis ground or to pin 4 of the 16-way data link connector.
2. Close all doors, turn ignition key to off.
3. Turn ignition key to Accessory.
4. Turn ignition to off, door locks will cycle once (in programming mode).
5. For each key FOB, press any button 3 times in a row to program code. When programming is complete, the door locks will cycle once.
IF A SECOND KEY FOB REQUIRES PROGRAMMING, IT MUST BE PROGRAMMED WITHIN 1 MINUTE OF PROGRAMMING
THE FIRST FOB PROGRAMMING. PRESS ANY BUTTON ON THE SECOND FOB 3 TIMES TO PROGRAM ITS CODE. WHEN PROGRAMMING IS COMPLETE, THE DOOR LOCKS WILL CYCLE ONCE.
6. The programming mode finishes after the following:
a. Programming of two key FOBS is completed.
b. One minute has passed since programming.
c. Pin 1 of 16-way data link connector is removed from ground connection.
d. Ignition switch is turned on.
e. Any of the doors are opened.
Posted on Jun 25, 2009
Sounds like the timing belt broke. Unfortunately this vehicle was not equiped with no contact valves so if that is the case you will need to have the engine and Head rebuilt. If the crank position sensor can't sense the position of the crank it should shutdown the electrical to keep you from damaging your engine.
Posted on Oct 09, 2009
Grab the bottom seat cushion at the front of one side and pull it straight up then do the same on the other side. (you will have to pull up very hard) The bottom of the seat clips in. once you have the bottom out take the 2 bolts out of the seat belt fasteners that holds the bottom of the top seat cushion. Then pull straight up on the seat cushion to slide it off two tabs that hold the top.
Posted on Mar 29, 2010
Tips for a great answer:
May 05, 2016 | 1999 Chrysler 300M
Feb 18, 2015 | 1999 Chrysler 300M
Oct 02, 2014 | 1999 Chrysler 300M
Feb 01, 2012 | 1999 Chrysler 300M
Sep 26, 2010 | 1999 Chrysler 300M
Jun 07, 2010 | 1999 Chrysler 300M
May 19, 2010 | 1999 Chrysler 300M
Mar 28, 2010 | 1999 Chrysler 300M
Dec 16, 2008 | 1999 Chrysler 300M
Dec 04, 2008 | 1999 Chrysler 300M
Jan 09, 2017 | 1999 Chrysler 300M
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: