Question about Toyota Land Cruiser
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i had the same problem. Flushed the sunroof drains, replaced the windsheild, and weather stripping on passenger and driver side doors. Car is still leaking. No one can figure it out.
Posted on Jul 31, 2008
SOURCE: 1995 toyota land cruiser
Your front "ball & socket" joints are in dire need of lubrication. You need to do this:
Take the tires off, and look for a fill plug behind the hub, on the housing, above the ball & socket. Remove the plug, and fill it up with 80-90 gear oil. Replace the plug, do the other side.
What you have is a dry joint, and the clicking noise is coming from the u-joint (actually called a "Rzeppa" joint), inside the ball/socket/hub...a good lubrication will eliminate your condition. Hope this answers your question, please feel free to comment back with any other questions...And, thanks for choosing FixYa.
Posted on Nov 01, 2008
1°00’ ± 45'
3°00’ ± 1°
Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.
(0.08 ± 0.08 in.
This is the only Land Cruiser Specs I could find, hope it helps
Posted on Apr 18, 2009
- you can down load full manual for toyota land cruiser from pdftown.com website
Posted on May 03, 2009
hi sir/mam,i have tryed to get help from allover,can i know who can.
i have Toyota land cruiser Model GF-RZJ 95W-GKPSK-D.
This vehical does not start,Digonest code 002:-Fauity RPM Signal(no RPM,NE and crankshaft position signal trnsmitied to ECU after started for 2 secondes)
1.CKP and CMP sensors short open
3.start circuit open or short.
i have changed distibuteor (NEW)
Posted on Jun 26, 2010
Tips for a great answer:
Oct 01, 2014 | 1995 Toyota Land Cruiser
Aug 19, 2010 | 1995 Toyota Land Cruiser
Feb 21, 2010 | 1995 Toyota Land Cruiser
Feb 05, 2010 | 1990 Toyota Land Cruiser
Jul 13, 2009 | 1995 Toyota Land Cruiser
May 27, 2009 | 1995 Toyota Land Cruiser
Dec 04, 2008 | 1995 Toyota Land Cruiser
Jun 07, 2008 | 1997 Toyota Land Cruiser
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: