Question about 1998 Dodge Durango

1 Answer

The fan on my 1998 durango will not work but the engine turns over could it be a spark plug

The belt came off while driving and I got it back on but once I started it it started smoking from underneath by were the fan was and the belt came back off I noticed that the fan was not moving what could this be? could it be a spark plug to the fan?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 5,332 Answers

Your water pump is seized and will need to be replaced. The part behind the pulley that wont move is the water pump. It has probably been making a lot of noise for a while?

Let me know if you have any questions and thank you for using FixYa.com!

Posted on Feb 20, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 740 Answers

SOURCE: fan belt diagram 04 dodge durango

Here is a diagram of you vehicle. Good Luck please leave a FIX YA comment if I fixed ya. http://www.2carpros.com/car_repair_information/tec_info/2004/dodge/durango/2004_dodge_durango_drive_belt_routing_diagram.htm

Posted on Dec 27, 2008

  • 3 Answers

SOURCE: fan loose , anti-freeze dripping

there is a weap hole in the bottom of the pump if it is leaking from that it is the pump they will make noise when they go out also

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 Toyota Avalon XLS squeals loadly when I start the engine and the fan is on in the car. I turn of the fan and it stops. After driving I turn the fan back on and don't get the squeal anym


Almost certainly one or more of the drive belts (not the timing belt) on the engine needs an increase in tension. It may tell you about this in the owner's handbook.

If not you can either ask a mechanic to do this straightforward job for you, or try it yourself. You can download a zipped service manual from here

http://www.freeautorepairmanual.org/free-download-toyota-avalon-service-manual.html


and look these belts up in the charging section and steering section.

May 15, 2012 | 1998 Toyota Avalon

2 Answers

Have a misfire on cylinder 3


Hello
Here is what to check let me know if you need help checking this out
most common misfire causes on the cars I've worked on have been:
  1. Spark plugs
  2. Spark plug wires
  3. Ignition coil
  4. Fuel injector
  5. Wiring to fuel injector
  6. Timing Belt
  7. Vacuum leak or stuck open EGR
  8. Contaminated fuel or bad fuel pump
  9. Weak compression
  10. Blown head gasket

Jul 14, 2010 | 1998 Dodge Durango

1 Answer

1998 dodge durango 360 motor engine cranks but no spark at spark plugs what can cause this?


Possibly a bad ignition coil which was a common issue on the 5.2/5.9 motors as they age.

Jun 23, 2010 | 1998 Dodge Durango

2 Answers

Locked up dodge durango engine.


it may be your timing belt

Jan 17, 2010 | 2000 Dodge Durango

1 Answer

How to replace a water pump on a 98 durango


0) url = inUrl tWindow = window.open(url, '_notes', 'toolbar=no,location=no,status=no,menubar=no, scrollbars=yes,resizable=yes,width=650,height=400') setTimeout('toolbarFocus()',500) } // --> "); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } function SizedForPrint(ImgName, ZoomPct, W, H, Target, Title, ImgMap, MapVar) { msg=window.open("",Target, "toolbar=yes,directories=no,scrollbars=yes,status=no,resizable=yes,menu=no"); msg.document.writeln(""); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } function SplitImagePiece(ImgName, ZoomPct, W, H, Target, Title, ImgMap, MapVar) { W = Math.floor(W * ZoomPct); H = Math.floor(H * ZoomPct); msg=window.open("",Target, "toolbar=yes,directories=no,scrollbars=yes,status=yes,resizable=yes,menubar=yes,location=yes"); msg.document.writeln(""); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } // --> 1998 Dodge Truck Durango 4WD V8-5.2L VIN Y blnk_spc.gif REMOVAL
The water pump can be removed and installed without discharging the air conditioning system (if equipped).
  1. Disconnect battery negative cable.
  2. Drain cooling system. Refer to Cooling System-Draining and Filling.
  3. Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse. WARNING: Constant tension hose clamps are used on most cooling system hoses. When removing or installing, use only tools designed for servicing this type of clamp, such as special clamp tool (number 6094). snap-on clamp tool (number HPC-20) may be used for larger clamps. Always wear safety glasses when servicing constant tension clamps. CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only an original equipment clamp with matching number or letter.
  4. Remove upper radiator hose clamp and hose at radiator.
  5. The thermal viscous fan drive is attached (threaded) to the water pump hub shaft. Remove fan/viscous fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front. Threads on viscous fan drive: are RIGHT HAND. A Snap-On 36 MM Fan Wrench (number SP346 from Snap-On Cummins Diesel Tool Set number 2017DSP) can be used. Place a bar or screwdriver between water pump pulley bolts to prevent pulley from rotating. Do not attempt to remove fan/viscous fan drive assembly from vehicle at this time.
  6. If water pump is being replaced, do not unbolt fan blade assembly from thermal viscous
  7. Remove fan shroud attaching hardware (two bolts at bottom-two clips at top).
  8. Remove fan shroud and fan blade/viscous fan drive assembly from vehicle as a complete unit.
  9. After removing fan blade/viscous fan drive assembly, do not place thermal viscous fan drive in horizontal position. If stored horizontally, silicone fluid in viscous fan drive could drain into its bearing assembly and contaminate lubricant.
  10. Do not remove water pump pulley bolts at this time.
  11. Remove accessory drive belt as follows: The drive belt is equipped with a spring loaded automatic tensioner. Relax tension from belt by rotating tensioner clockwise (as viewed from front). When all belt tension has been relaxed, remove accessory drive belt.
  12. Remove four water pump pulley-to-water pump hub bolts and remove pulley from vehicle.






blnk_spc.gif _uacct = "UA-1870158-4"; urchinTracker();

Jun 30, 2009 | 1998 Dodge Durango

1 Answer

1998 Dodge Durango Turns over but wont start


could be Fuel Injectors, are bad ?
all you need is # 1 Fuel Injector, to go out that will not get Fire, and Fuel Mixture to Spark Plug.

Jun 03, 2009 | 1999 Dodge Durango

1 Answer

No fan for heat


RE: 1998 DURANGO, 4 WHEEL DRIVE, 318 ENGINE

A FROST PLUG ON THE DRIVERS SIDE IS LEAKING.

THE FROST PLUG IS LOCATED BEHIND A BRACKET HOLDING THE FRONT WHEEL DRIVE TRANSFER UNIT.

HOW DO I CHANGE THIS FROST PLUG?

Apr 09, 2009 | 2001 Dodge Durango

2 Answers

Diagram for fan belt repair


2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

Aug 25, 2008 | 1998 Ford Escort

Not finding what you are looking for?
1998 Dodge Durango Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...