Question about 2007 Jeep Compass 2.0

Open Question

2007 jeep compassdoor panel removal passenger door

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
FoRdMaStEr
  • 51 Answers

SOURCE: Door panel removal

there are a few screws you need to remove before pulling off the panel. one is in the inner door handle, the other is behind the inner door release handle and there may be one in the very top left of door panel

Posted on Jan 06, 2009

Ad
madclos1
  • 6 Answers

SOURCE: Replacing passenger mirror on 1994 Jeep Grand

yes you do

Posted on Jun 25, 2009

ZJLimited
  • 17970 Answers

SOURCE: how do you remove rear drivers side door panel on 2002 jeep

Several steps in here; review the KJ-2002-Liberty-Service-Manual-PDF-Secc-23-Body (page 128 and next).

I hope help you with this. Remember rated this help, good luck.


Posted on Sep 04, 2009

Testimonial: "THat information really helped thanks alot!!!"

ZJLimited
  • 17970 Answers

SOURCE: I need to remove the interior panel on a 2000 Jeep Gnd Cherokee L

Review the Section-23-Body-ewj23S (page 34 and next).

Good luck (remember rated this help).

Posted on Sep 21, 2009

duane_wong
  • 6826 Answers

SOURCE: looking to find out how to take apart the

This must be proprietary information because service information was not listed on my online research site.

Perhaps the vehicle is too new to publish such data.

I wish you luck in finding the information elsewhere.

Maybe, purchasing the Haynes or Chilton Manual would give a specific diagram.

Posted on Jul 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove electric passenger side view mirror freom 2007 mitsubishi galant es


not exactly same steps but similar. Most cars I have worked on the screws were along the bottom and on the arm rest. Make sure you remove all screws some may be under a access panel. Use caution when pulling on clips

Jun 26, 2016 | 2007 Mitsubishi Galant ES

1 Answer

Slammed the passenger door on 2007 jeep liberty , and window will not go up anymore.


Broken Window Regulator

Don't hit the kids & dog as well

Pull the door panel to see the problem

Aug 12, 2014 | Cars & Trucks

1 Answer

How do i remove drivers side door panel on 2007 jeep compass with power windows?


There are panel removal tools available, but any flat prytool will suffice to pry panel away. There are also screws located at the actual door pull/handle area to remove. after loose, panel must be raised vertically as the top trim/rubber will be hooked @ window opening. there are also wires to be watchfull of and clips to disconnect before panel will be successfully pulled away. Reinstall is just the reverse procedure.

Sep 24, 2013 | 2007 Jeep Compass 2.0

1 Answer

Thow to take off door pannel and install passenger side window motor on 2000 jeep grand cherokee


first you have to remove dead plugs on door handle and remove screws another screw on door opening handle and you have to disconnect 2 metal pins behind that and look all around the door panel sides and under should have several rivets make sure no any screw and rivets left on door panel pull door panel foward and pull it up dont go too hard dont damage door panel conections for proper reinstallation. before removing door panel from the door dont forget disconnect cable connections from window and door lock switches.good luck

May 07, 2011 | 2000 Jeep Cherokee

1 Answer

Hhamilton8@cox.net need to remove passenger door


Remove all the screws in the door panel. Remove window and lock controls. Make sure to get the piece by the mirror on the inside. Then gently pry all the way around the panel and slowly pull it off. Once it is completely loose, lift it up and off the door.

Oct 05, 2010 | 2007 Chevrolet Express Passenger

1 Answer

Describe how to change the passenger mirror on a 2007 Toyota Sien


Hi, First remove the door panel. (The connector for the mirror is behind the panel just to the left of the door handle.) The arm rest cover pops off by gently prying upward at the corners near the door panel and along the outer edge of the arm rest. Then remove the 2 screws. Remove the screw that holds the door handle bezel on. Remove the little plastic plug to the left of the door handle as well. This reveals yet another screw to remove. Now you can gently pull the door panel away from the door. The little plastic clips will pop out of the door. If they come away from the door panel they easily fit back in place in the metal retainers built into the door panel. You can now disconnect the connector and remove the 3 10mm mirror bolts.
With respect to the door handle bezel on the inside of the door, to remove it you must pull/slide the bezel away from the door hinge. It should move an 1/8 to 1/4 inch. There is a little tab that hooks inside the door handle mechanism and two small holes, top and bottom, that slip over little pegs on the mechanism. I broke this tab while removing the bezel on my car. This was the most difficult part, on my car, to remove.
Take care

Jul 23, 2010 | 2007 Toyota Sienna

1 Answer

The passenger door will not open 1993 Jeep Wrangler


assuming that this jeep has not been wrecked recently, the only way to get that door open is to remove the door panel while the door is closed, at least enough to reach the door latch inside the door, once reached you can operate it and release it to open the door, I will tell you that the likely hood of damage to the door panel will probably occur, I have had this problem before and I had to cut a hole in the panel reach in and open the door, sorry it can't be simpler. if you feel the latch operating and you have recently ran into something, try pull the door handle from inside while pushing the door open

Mar 23, 2009 | 1993 Jeep Wrangler

1 Answer

Replace 2007 Toyota Rav4 super sport passenger side door mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Door panel removal


there are a few screws you need to remove before pulling off the panel. one is in the inner door handle, the other is behind the inner door release handle and there may be one in the very top left of door panel

Dec 30, 2008 | 2005 Jeep Liberty

Not finding what you are looking for?
2007 Jeep Compass 2.0 Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...