Question about 2002 Toyota RAV4

1 Answer

2002 rav4 how do i remove the drivers door panel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Disengage auto door locks


My toyota MR2 has this feature, its done by operating the drivers door switch seven times in succession, if the car then agrees it enters a security programming mode where you can change these security settings. Ask your toyota dealer how its done on yours, they can be helpful.

Dec 21, 2013 | 2002 Toyota RAV4

1 Answer

Toyota RAV4 2010 Power Remote driver mirror Removal


You must remove the door panel to remove the mirror and disconnect the wiring harness tothe remote mirror.

Nov 05, 2012 | Cars & Trucks

1 Answer

RAV4 inside panel righthand rear door removal


Please follow this link for how to on removing the rear door panel on the RAV4.

Oct 26, 2012 | 2004 Toyota RAV4

2 Answers

What is the main cause of this problem if my driver's side door won't lock or unlock using the remote or the switch inside but the other 3 doors would. Please help.


either the power lock mechanism inside that particular door is shot , or the wire that goes to it is. It would not be on a seperate circuit / fuse / or relay than the others. The inner door panel will have to be removed to access the lock mechanism.

Oct 16, 2010 | 2002 Toyota RAV4

1 Answer

How to remove the ECM located in a 2002 toyota rav4


The ECM located behind the glove compartment door, remove the glove compartment you will see the ECM.

hope this can help

Apr 13, 2010 | 2002 Toyota RAV4

1 Answer

Driver side keyless entry does not work. Other


does the door unlock with a key? if not, then you may have a disconnected linkage. You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Way cheaper to do it yourself than have the dealer do it... cost me $30-50 to do it myself and the dealer was gonna charge me $300

Aug 14, 2009 | 2002 Toyota RAV4

1 Answer

2002 Toyota Rav4 remove door panel


There are some hidden screws around the door handle but you get under the panel and yank hard to pop the fasteners. Also remove the black piece behind the mirror. Alot of times it is seperate. 3 screws behind that and the connector and you are done.

Jul 18, 2009 | 2002 Toyota RAV4

1 Answer

Removing interior door panal w/o breaking it


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 16, 2009 | 2002 Toyota RAV4

1 Answer

Replacing driver side mirror


Take off side door panel, screws securing it are revealed, unscrew screws remove them and and the mirror drops off. If the wing mirror is on the bodywork, then the screws should be either in the wheel arch or under the bonnet.

Feb 11, 2009 | 2006 Toyota RAV4

Not finding what you are looking for?
2002 Toyota RAV4 Logo

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...