Question about 1993 Mazda MX-6

2 Answers

1993 tail lights not working, brakelight ,work an turn sigles work. but no tailghts.

Tailight not working

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Do your dash lites work? If the answer is no then you need to replace the fuse for that circuit. If the answer is yes then check to see if you are getting power to the tail lites and if you are then replace the bulbs, if you are not then you will need to trace the circuit back to the power supply.

Posted on Oct 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Sometimes they are seperate bulbs i would check all the bulbs if there all okay then u might have a short somewhere

Posted on Oct 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights not working change fuses,


There should be a switch under the brake pedal. This should opearate the brake lights. It is also not impossible for both the brakelight lightbulbs to blow at the same time.

Sometimes a trunklid slamming can break the filaments. Check the switch under the brake pedal first and remember to look at the backwindow light to see if it is working. The brake pedal switch is simple to install. The rear window light may work if the tailight wires are unplugged.

Jun 06, 2010 | 1993 Mercury Grand Marquis

1 Answer

Only one tailight works. replaced bulb. brake lights work turn signals work driver side tailight works no tailight on passenger side.


i think you'll find with a test light at the tail light connector,that the you do have power but the problem is the unit that holds the bulbs and is a printed circuit is bad

Dec 07, 2009 | 2000 Chevrolet Silverado

1 Answer

1993 plymount voyeger tailights wont work dash out fuse are good


if you have checked the tail light fuse with a test light and it was good,remove one tail light assembly and check for power before socket with a test light and parking lights on,if no power replace headlight switch,if you have power in wire replace bulbs or check for faulty ground

Dec 04, 2009 | 1993 Plymouth Voyager

1 Answer

I have tail lights, but no brake lights


the brake light switch has it's own fuse that is on all the time. test light power at the switch? push the peadel down and both wires should be hot if they are theres more.! turn on the hazard flashers do the brak lights flash brightly? That proves the bulbs the sockets and the wires if they do. if not the cicirt boards in the tailghts can be bought at discount part stores and their better than the ones that came with the truck but they'll fail too. Before buying them turn the flashers on and remove the tailight and unplug it. turn the parking light on tooas you need to see some thing that works also, Find a good ground for your test light and probe each wire of the plug one wire the brown one will be on steady the yellow or green wire will be flashing if the front of the truck is OK the other two wires are the backup light and the ground wire if the test light works and the light doesnt check the bulbs their good chang e the circuirt boards

Aug 12, 2009 | 1988 GMC K2500

1 Answer

Taillights will not work, but turn sig, brakelights work, fuses are all good


Some makes and models have different taillight bulbs and brakelight bulbs. in other words your turn signals and brakelights are on one bulb and the tailights are on another, or they have multiple filaments and one of them could be bad

Aug 01, 2009 | 2002 Dodge Ram 3500 Truck

1 Answer

Dashboard lights and tail lights don't work


Check the TAILGHT FUSE. GM's unusual way of letting you know there is something wrong. Otherwise how often do you check your tailight operation. Only by another driver telling you, your tailights aren't working, would you know. Hope this helps.

Apr 29, 2009 | 1998 Jeep Cherokee Grand 2WD

1 Answer

Replaced brakelight switch ,still no brake lights, and tailights


Check to make sure you have the correct bulb in them. Even though the parts store may have had a part number, sometimes they don't get them right. If those are correct check the relays and or the socket itself.

Mar 26, 2009 | 1989 Mercury Grand Marquis

2 Answers

Tailights dont turn on


You have POSSIBLY 1. Headlight Switch bad
2. Disconnected or Corroded Ground in trunk
3. Make Absolutly sure the tail lamp FUSE is good
These are realy the only things I would suspect , Because Brakelights and Reverse lights are on
Different Curcits.

Jan 09, 2009 | 1995 Ford Mustang

2 Answers

1987 dodge ramcharger 4x4 318 2bbl,auto,no headlights/tailights


Check all fuses, plus connections of any smaller gauge wires at battery posts.

Nov 16, 2008 | 1985 Dodge Ramcharger

Not finding what you are looking for?
1993 Mazda MX-6 Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...