Question about Oldsmobile Intrigue

Open Question

1999 olds intrigue 3.5L can I clean the rear O2 sensor

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 1999 intrigue rear speaker help

The lower seat cushion, the back seat rest, the side trim panels and the package shelf all have to be removed to access the rear speakers.

Posted on Mar 14, 2009

Ad
66 chrgr
  • 1011 Answers

SOURCE: 1999 olds intrigue hard starting had indution

sounds like your plug wires are breaking down have them replaced along with your spark plugs!

Posted on Apr 04, 2009

ourhowse
  • 2007 Answers

SOURCE: CLEANING THE MAF SENSOR ON MY '99 INTRIGUE

You don't clean them, you get a new one. Usually if it's the MAF, it'll start and die, start and die. If your's is stalling, it'll be the idle air control valve, or the fuel filter, or the idle control system, or a vacuum leak at the intake or vacuum hoses. Good luck.

Posted on May 06, 2009

  • 38 Answers

SOURCE: I have a 1999 chevy blazer with a 4.3l I took the

sounds like you know what you are doing, sometimes the codes have to be removed after repair, i'm not sure whether or not your vehicle requires this. If it is just a light bothering you try and clear the code and see if it comes back. Some Advance Auto or O'reilly has a tool to do this free of charge

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 Olds Intrigue needs an O2 sensor. Where is that located and how hard/easy is it to replace it?


Should not be too tough to change. The front sensor is between the engine exhaust manifold and the catalytic converter.

Jan 24, 2013 | 1998 Oldsmobile Intrigue

1 Answer

Codes PO141,PO403 on Olds Intrigue 1998


PO141--Oxygen Sensor Heater Malfunction (Bank 1 Sensor 2)

I would change all the O2 Sensors,when a monitor or downstream
fails,which they seldom do

PO403--EGR Circuit Malfunction

Codes Related---NO

Converter- if it is 14 years old, it is done working very well,
but not related to the heater in the oxygen sensor

I would do all the O2's,the converters & EGR Valve & go from there

I never give out that info,but look how old the car is,it won't pass
inspection, with just one of those three issues

Jun 01, 2012 | 1998 Oldsmobile Intrigue

1 Answer

1999 Olds Intrigue starts right up but idles so poorly it will not move.


Id try cleaning the idle air control or replacing it. Clean the MAF sensor with MAF cleaner. Seafoam the intake too. See what happens after that.

Jan 29, 2011 | 1998 Oldsmobile Intrigue

3 Answers

Is it a timing belt on olds intrigue 2000, 3,5L?


this engine uses a timing chain, chains require no replacement unless the engine is being repaired or the chain or spockets fail

Mar 26, 2010 | 2000 Oldsmobile Intrigue

1 Answer

I need to replace the O2 sensor on my 99 Oldsmobile; where is it and can I do it? 1999 Oldsmobile Intrigue GL


it depends on which o2 sensor is bad. you have 2 on your car ones an upstream o2 sensor which is before catalyic convertor the other is a downstreem o2 which is located after the cat. they both range anywhere from 50.00 to 100.00 a peice. and there is a special tool to buy to change it. this is what it looks like. 945a39f.jpg if you don't mind jacking your car up and placing jack stands under the car to support it. you should be able to replace it. besure to spray it real good with some penatrating oil like wd40 and let it soak for a while before trying to remove it.

Mar 12, 2010 | 1999 Oldsmobile Intrigue

1 Answer

I am replaceing the cat converter and O2 sensors on a 99 olds intregue where is the front O2 sensor located


it has to be in front of the converter, somewhere between the exhaust manifold and the cat

Feb 25, 2010 | 1999 Oldsmobile Intrigue

1 Answer

CLEANING THE MAF SENSOR ON MY '99 INTRIGUE


You don't clean them, you get a new one. Usually if it's the MAF, it'll start and die, start and die. If your's is stalling, it'll be the idle air control valve, or the fuel filter, or the idle control system, or a vacuum leak at the intake or vacuum hoses. Good luck.

May 06, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Trying to find where a new "coolant temp. sensor" goes.


On rear head - its the grey connector barely visible:


bab3911.jpg

Mar 13, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Trying to find where a new ''coolant temp. sensor'' goes.


It's the grey connector on this photo, on the transmission side of the rear head:


5930307.jpg

Mar 13, 2009 | 1999 Oldsmobile Intrigue

1 Answer

1999 Olds Intrigue electric windows


The switch could be bad or needs to be cleaned.

Mar 06, 2009 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...