Question about 2006 Jeep Liberty

Open Question

How do you change fog light bulb on 2006 jeep liberty

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

FoRdMaStEr
  • 51 Answers

SOURCE: how to change fog light bulb on 2004 jeep grand cherokee

you have to crawl under the front of the vehicle and look at the back side of the light you will find the connector and the bulb

Posted on Jan 06, 2009

Mikey108
  • 475 Answers

SOURCE: i have a 2006 jeep liberty and three lights are staying lit and

You need to take the jeep to a dealer or a good mechanic who can retreive the codes out of the computer. You may have a module problem but I will not guess without knowing the codes.

Posted on Feb 11, 2009

  • 11 Answers

SOURCE: 98 Jeep Cherokee Fog lights

It's definitely the switch...I bought two of 'em so far...known bug. I don't use the fog lights as much anymore , but the "Airtex" oem equivalent switch from Rockauto seems to be holding up well. If you dissamble your broke switch you'll probably see evidence that it is beginning to melt and theres alot, maybe too much, grease, which may or may not have been the cause of the bad, heating contacts inside switch.
If I remember right, even though the foglights have a relay there is still full amperage going through the switch or something....don't qoute me on that last statement.

Posted on Feb 14, 2009

  • 249 Answers

SOURCE: 2005 jeep liberty brake lights will not work. I

brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.

Posted on Aug 15, 2009

  • 521 Answers

SOURCE: 2006 JEEP LIBERTY BATTERY LIGHT KEEPS GOING ON AND OFF

have the alternator tested as well as the battery.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep liberty 2002 fog lights not working what could be wrong with them?


Check your fuses first, then your bulbs. If it is neither of those, it might be an issue with the on/off switch. You will have to have it checked by an automotive shop.

Nov 14, 2014 | 2002 Jeep Liberty

1 Answer

2003 jeep liberty fog lights won't work. fuse is good


I had this prblem and put new bulbs in and still didnt work,,,IT WAS THE SWITCH that controls the fog lites,,,went to junkyard and got another,,,or ebay

Mar 11, 2011 | 2003 Jeep Liberty

1 Answer

What is the easiest way to change the front left fog lamp bulb on a 2005 Jeep Liberty Limited?


Had mine changed last week in a garage. The guy litterally reached in with his arm and after a little gymnastic, he twisted it out. He didn,t take anything apart. Bulb : 20$, Laber 10$, Took him 10 minutes and I didn't get dirty.

Jan 22, 2011 | 2005 Jeep Liberty

1 Answer

Liberty 2006 : Cruise control and fog lamps are not working... Lamps are not burnt out. Cruise light indicator does not light...


It sounds like your multifunction switch has an internal failure and needs to be replaced. This is the part that you flip to use the turn signals, wipers, cruise control, fog lamps, etc. This can be an expensive part, but it is almost certainly the cause of your concern.

Let me know if you'd like to know how to replace it. It is a fairly easy part to replace.

Hope this helps!

Aug 30, 2010 | 2006 Jeep Liberty

1 Answer

How do i change the brake light on jeep liberty 2006?


1) You will need to open the rear swing door.

2) On the inside jam there are two torx headed screws (T-15's if I remember correctly).

3) Unscrew the two torx screws.

4) The light is now held by two mounting tabs (small spherical headed plastic sets that go through a rubber grommet).

5) You will need to pry the light casing off (easy pressure with a good size flat head screw driver will do the trick).

6) The light bulbs are twist mount settings inside the light casing.

7) Twist out the mount setting, change the bulbs, and reset the light mountings.

8) To put the light casing push the light casing back on and put in the screws. Everything else will work in reverse when it comes to assembling the whole unit.

2006 Jeep Liberty Replacement Light Bulb Sizes
Low Beam Headlamp Bulb Size: 9007
High Beam Headlamp Bulb Size: 9007
Parking Light Bulb Size: 2825 or 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3757ALL
Tail Light Bulb Size: 3157
Stop Light Bulb Size: 3157
High Mount Stop Light Bulb Size: 921
Fog/Driving Light Bulb Size: 9145 or H3-55W
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3157
Front Side Marker Light Bulb Size: 168
Ash Tray Light Bulb Size: 161
Map Light Bulb Size: 578
Dome Light Bulb Size: 578
Step/Courtesy Light Bulb Size: 906
Trunk/Cargo Area Light Bulb Size: 578

Thank you for using fixya, and good luck

May 08, 2010 | 2006 Jeep Liberty

1 Answer

How do i replace the fog lamp on a 2005 jeep liberty


is it the bulb or whole light assembly. Both are easy, the bulb has a slotted lock. turn the bulb to the left and it should come out. The assembly, under the front bumper, look at the light housing. There should be 2-4 small nuts mounting it to the surrounding body, once these are removed it will come out the backside.

Jan 01, 2010 | 2005 Jeep Liberty

1 Answer

I have a 2008 Jeep Liberty sport it has 39600 back-up lights not


If you have tested fuses and bulbs with test light,and they check out,
the next step is to put you jeep in reverse with the key on,and use your test light to probe the wires before they enter the bulb sockets for power,if you have power replace sockets,if not check to make sure wires are still connected to back up light switch on trans,if you find no problem there,replace the switch

Dec 03, 2009 | 2006 Jeep Liberty

1 Answer

The brake lights on my 2006 jeep liberty do not last long and it seems like the bulbs are melting the lens.


Have seen this many times on the liberty. End up replacing the whole assembly from the dealer. Seems to solve the issue.

Aug 30, 2009 | 2006 Jeep Liberty

4 Answers

2007 Jeep Liberty 3.7L engine


The Jeep comes with Platinum plugs from the factory.
And also a little secret-They are guarenteed from the manufacture for 1000,000 miles
Your Jeep should have Champion plugs in it.

Sep 03, 2008 | 2006 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...