Question about 2000 Lincoln Town Car
Jo Ann , under the brake pedal there is a switch that is bad that needs replaced. To side step it so you may travel/ use your car. With 1 foot on brake turn key to on position then move gear shifter into natural turn key all the way to start, bam car is out of park and ready to roll/ drive.
Posted on Feb 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One of 2 ways.......
#1) mounting screws on the exterior of the brake light lens.
#2) in the trunk behind the carpeting, usually this is the easiest way. either way the bulb is held in by a twist lock bulb holder.
Posted on Nov 30, 2008
Open the hood and make sure the car and the lights are off.
Remove the plastic protective cover.There are 3 knobs,turn halfway and pull.Put aside and out of the way.
Remove the three pins that are holding the light assembly in place.These are flat rods with a little bend at the end.
Twist and un-plug the lights,now you can remove the whole lens.
The light bulbs can also be removed and replaced from this point.
Make sure all the bulbs are working before you put it back together.
Posted on Mar 13, 2009
Tips for a great answer:
Feb 26, 2013 | 1998 Lincoln Town Car
Nov 30, 2012 | Cars & Trucks
Jul 18, 2012 | Lincoln Town Car Cars & Trucks
Nov 05, 2011 | 1998 Lincoln Town Car
Sep 23, 2010 | 1992 Lincoln Town Car
Feb 07, 2010 | 1997 Lincoln Town Car
May 03, 2009 | 1998 Lincoln Town Car
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: