Question about 1995 Dodge Dakota

1 Answer

Where is vacuum hose for cruise control 95 dodge dakota

V8 5.2 liter engine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

On the 95 5.2 318 SLT it comes off the passenger side of the intake manifold around middle ways under the center section bellow the throttle body.From there the vacuum line goes through a one-way "in-line"directional valve.The valve has the black side to the vacuum port of the manifold. It there goes to a "T" fitting.One hose on the "T" goes to the driver side through the firewall to regulate air flow in the cab.The other side of the "T" goes to the air ball next to the cruise control servo on the firewall. This hollow ball stores 10" of vacuum to operate the vacuum diaphragm of the cruise control servo. Hopes this helps. Jimmy

Posted on Mar 05, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 154 Answers

SOURCE: 95 dodge dakota heater blower not working

It has been a long time since I've replaced one of those. From what I remember you don't have to go through pulling the heater box out. You do need to remove the glove box assembly. Look up under the passenger side of the dash. If you see the bulge of the motor/cover hanging straight down then remove the cover and the motor will be there. If you don't see that then te motor is mounted horizonally. If that is the case then the fresh air door assembly will need to be removed and it is behind that.
Here is a quick check to see if the motor is bad. Thump the bottom of the heater box by the passenger's feet. if the motor comes alive or makes noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds)

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: 1995 Dodge Dakota Pick up

go to Didgeforums.com.

I had a similiar problem, found the solution there. It was the wiring harnes on the drivers side under the hood, just above the wheel well. there are a cluster of wires in a bundle. I unpacked the bundle carefuly and sure enough the were two or three wires all coroded, had wite powder from corosion. repaired the connections and bingo. I posted details at dodgeforums.com. browse around there. I posted pictures as well. this is a common problem.

Posted on Sep 05, 2008

csmock132
  • 4669 Answers

SOURCE: dodge dakota cruise control and horn quit working

Clockspring? Is the airbag light on?

Posted on Mar 24, 2009

  • 154 Answers

SOURCE: how to replace water pump on 1995 dodge dakato 5.2 liter V8

When I do those I find it's easier to get some of the stuff out of the way. Fan shroud, Alternator, AC compressor(don't remove AC hoses just swing it over to the side) and the AC/alternator mount bracket. If you don't have the special hose clamp plyers they are worth buying. (those clamps are difficult with regular plyers) The fan clutch has a special wrench which is thinner. When you start the job break loose the fan clutch before you remove the belt. It keeps tension on the pulley. The nut is normal threading and usually comes loose with a sharp rap of the hammer on the fan clutch wrench.
Here is an illustration of the water pump bolts. I hope this helps you out. let me know how it goes.6f7219e.gif

Posted on Apr 05, 2009

M barJ
  • 1 Answer

SOURCE: Cruise control not working

The pump is located on the passenger side of the engine compartment, back by the firewall. Look in the middle of the firewall by the cowl and you'll see a small plastic line going into the cowl. follow it back and you will come to a T fitting. Follow it to the passenger side and it will go into the Vacuum pump that controls the Cruise control.If you follow it to the other side, it goes under the Battery box. this is where the Servo for the cruise is located. Check the lines for small cracks, wear spots or even breaks. The plastic line can get beaten up pretty easily.
The easy way to see if it is your vacuum pump, turn the key on and listen. you will hear 2 distinct sounds. The first sound will stop in about 15 - 20 seconds. (fuel pump?) the second sound is the vacuum pump. If it turns off in 45 seconds to a minute (or slightly longer) the vacuum pump is probably ok, as are the plastic lines. The sound of the pump stopping means that vacuum has been achieved and is holding vacuum. If it keeps running, the pump is bad or the lines have a break in them. If the lines have had a hole in them for a long time, the diaphragm in the pump will have gone south. This is not a servicable part and the pump will have to be replaced. The pump is available from a dodge dealer but most likely the parts guy will not have a clue as there is no picture in their manual and a very poor description. When talking to them ask for a "03 Ram 2500 CUMMINS Cruise vacuum pump"
The part costs $212.70

Posted on Jul 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Dodge ram 1500 4x4 4.7 liter, cruise control light comes on the dash. When I push the set button nothing happens and the light that says cruise on the dash stay on but will not engage


Locate and check the fuse, check clutch switch, che k vacuum hoses, and vehicle speed sensor and throttle linkage. Hope that helps.

Dec 18, 2015 | Dodge Cars & Trucks

1 Answer

How will bad manifold temperature senser make a 95 dodge dekota run.


If it thinks the engine is cold all the time the fuel mix will be wrong when the car is at normal operating temp.

Mar 02, 2015 | 1995 Dodge Dakota

1 Answer

Engine revving high


maybe cruise control or vacuum leak

Dec 02, 2013 | Dodge Dakota Cars & Trucks

1 Answer

Hey got a cruise control problem


a mechanic just replaced a vacuum hose (don't know where) and my cruise control started working again!

Oct 07, 2009 | 1997 Dodge Grand Caravan

1 Answer

I just want to know where the speed control vacuum control circuits is on my 1996 Dodge Magnum dakota pickup truck is.


If you are talking about the cruise control, there is a cable that comes off of the throttle and into a mechanism on the firewall. It vaguely, somewhat, not really looks like a mushroom. This is the cruise control unit. There will be one or two vacuum lines in it. Consult your vacuum diagram under the hood to find out where they are supposed to go.

Sep 13, 2009 | 1996 Dodge Dakota

1 Answer

Blower motor in 1993 dodge dakota


u must have knocked the vacuum hose off when u changed the motor, that (vacuum) is what moves the air to the different outlets, the vacuum comes from the engine and enters the cab on the passenger side..

May 12, 2009 | 1995 Dodge Dakota

2 Answers

Ac only blows through defrost vents


prbly have a leak in your vacume lines, have to pull the heater controlls and make sure every things conected and not leakin if its good youll have to trace your vacume lines farther

Mar 19, 2009 | 1997 Dodge Dakota

Not finding what you are looking for?
1995 Dodge Dakota Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...