Rocker arm torque spec 2001 hyundai accent

SOURCE: looking for torque specs on a hyundai accent gl

1. 
   
2. For 3.0L engines, tighten head bolts in sequence to 76-83 ft. lbs. (105-115 Nm).
3. For 2.5L engines, tighten the bolts in sequence as follows:
   1. Step 1: 18 ft. lbs. (25 Nm).
   2. Step 2: Plus 60-64 degree turn.
   3. Step 3: Plus 45-49 degree turn.

SOURCE: need torque specs for connecting rod and main

Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck

Testimonial: "Thanks for the help Chuck"

SOURCE: good morning changing haed gasket

cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

SOURCE: I want to know the torque spec for a wheel bearing

front hub axle nut 162-192 ft lbs.

lug nut 66-81 ft lbs.

rear hub nut 148-192 ft lbs.

SOURCE: torque specs.for hyundai accent? need to torque

step 1 26 ft lbs.

step 2 additional 90 degrees

step 3 loosen all bolts one full turn

step 4 26 ft lbs.

step 5 additional 90 degrees