Question about 1990 Cadillac SeVille

1 Answer

1990 Cadillac Seville won't start. Is it the electronic control module?

The spark plugs get no spark. fuel pump works. Fuel filter clear.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This For spark plug problem, click the help links provided below: ---
Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------
How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

-------------
Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

----------
How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------
Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

-----------
How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

---------
How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

---------
Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.
Thanks.

Posted on Mar 13, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1996 cadillac seville sls codes

1996 cadillac sls. Oil light comes on and car stalls. Oil is full

Posted on Dec 29, 2008

  • 115 Answers

SOURCE: how to change fuel pump 1990 cadillac seville

The fuel pump and sending unit is located in the tank. I hope your tank is empty, if not you will need to siphon it out. It is dangerous with the gasoline, and remember the fumes burn, not gas. You start by removing the filler hose, then loosen straps, detach sending unit wire and fuel line, then lower tank. Then unscrew the sending unit/pump and replace. reinstall.

Posted on Jul 05, 2009

  • 1 Answer

SOURCE: i have a 2000 cadillac seville sls well it have

my sts is hard starting cold and after it sits for 5 to 10 min.

Posted on Sep 22, 2009

  • 1 Answer

SOURCE: cadillac seville won't start

I've got an even cheaper and easier solution, instead of buying a new cylinder, find that plug and snip the orange wires going to the old cylinder.Then remove the resistor chip from the key and solder each of the the wires to each side. this will fool the car into thinking the correct resistor chip is in place, allowing you to use the original key or any copies with or without resistor chips. i just did this to my caddy and it roared to life! :)

Posted on May 20, 2010

bluebirdmate
  • 1190 Answers

SOURCE: where is the body control module for 1993 cadillac

REMOVE GLOVE BOX,BCM IS MOUNTED ON TOP OF THE HVAC CASE

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 4.3 v6 tbi s10 starting problem. Won't squirt


Are the injectors getting power and a ground signal from the computer ?

Sep 06, 2013 | Cars & Trucks

1 Answer

Won't start,has spark, has fuel


Are you sure the injectors are spraying if the pressure is zero ?
Have you checked the fuel pressure regulator ?
Are the spark plugs dry ?

Dec 12, 2012 | 1998 Cadillac DeVille

2 Answers

2002 Ford Explorer ran out of gas put gas in and won't restart. replaced fuel pump and fuel filter still won't start. Cranks but won't start


Most Fords have a fuel reset button. When you ran out of gas you tripped the circuit. Most of the time the button will be on the passenger side by the kick panel. The exact location should be in your owners manual or your local library or auto parts store will have a copy of one for your specific vehicle.

May 08, 2012 | 2000 Cadillac Seville

1 Answer

1990 Cadillac Seville won't start.


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.
Thanks.

Feb 19, 2012 | 1990 Cadillac Deville

2 Answers

Toyota wont start


get the comprestion tested on all cylinders.

Jul 04, 2009 | 1990 Toyota Camry

Not finding what you are looking for?
1990 Cadillac SeVille Logo

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...