Question about 2007 Chevrolet HHR Special Edition
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.
Posted on May 15, 2008
the power steering fluid resevoir is located on the passenger side of the engine compartment near the fire wall. mostimes in order to fill it you have to remove the altenator to remove the fill cap to add the fluid.
Posted on Apr 17, 2009
You may have blown more than the power steering fuse (#1, 60A). You should check all the fuses in the underhood fuse box and you will probably find at least 1 more.
Also check the inside fuse box in the passenger side of the console.
Posted on Mar 22, 2010
SOURCE: 2007 Chevy HHR Fuse panel
There should be a printed list on the inside of the fuse boxes, as well as in the owners manual. There is one box under the hood, and another on the right side of the console near the passenger's feet.
Posted on Jun 08, 2010
Tips for a great answer:
Apr 01, 2017 | 2007 Chevrolet HHR
Dec 10, 2016 | Cars & Trucks
Aug 05, 2015 | 2006 Chevrolet HHR
Dec 23, 2013 | Cars & Trucks
Apr 01, 2011 | 2006 Chevrolet HHR
Jun 19, 2010 | 2006 Chevrolet HHR
Mar 08, 2010 | 2006 Chevrolet HHR
Jul 09, 2009 | 2007 Chevrolet HHR Special Edition
Apr 17, 2009 | 2006 Chevrolet HHR
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: