Question about 1998 Oldsmobile Intrigue

1 Answer

I have a 98 Olds Intrigue. Hazards & Blinkers flash in the rear only.... the front lights up solid, no blinking. When disconnected from the head lamp assembly we have tested the flasher wire....

Hazard/flasher switch has been replaced. When blinkers are turned on they blink rapidly on the dash & rear of car only. The front light are lit solid. When hazard lights are turned on dash & rear lights are normal....but the front lights are still lit solid and do not blink.

Posted by on

  • Kansas Avenue Auto Center Inc

    Begin with the basics.....Fault tracing w/Pinpoint testing w/Wiring diagram is the next logical step

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 57 Answers

Have you checked the fuse under the drivers side dash?Manual should give you an image and should be label'd

Posted on Feb 19, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: 1999 Olds Intrigue Front blinkers don't work,

The most common cause will most likely be the turn signal/multifunction switch. Hard to confim it without testing the outputs from the switch. I have replace more than 100 on this body style of car

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When my headlights are on I don't have any rear blinkers and lights blink fast in car they work fine when headlights are off can u help?


check the ground wires to the rear lights sometimes the head lights will provide backfeed ground when off but cannot when on this would explain the rapid flash

Sep 29, 2014 | 2007 GMC Acadia SLE

1 Answer

1974camper special brake light wiring diagram


Stupid question but have you checked your fuses yet? Second, it could be your brake light switch behind the brake pedal. Next, try your hazards....does the rear blink? When you use your turn signal lever, do the front lights blink properly or at all?

Sep 02, 2014 | Cars & Trucks

1 Answer

On my 2005 grand priex my front blinkers are new and all it does it turn on it dont blink what could be wrong


If both front & rear lights light up but dont flash the turn signal flasher is bad. Verify all bulbs are lit, on both sides of vehicle front & rear.

Jun 23, 2010 | Cars & Trucks

3 Answers

I have a 98 chev cavalier z24. Both indicator


Sounds like the signal multi-function switch has a short it it. Get a new one.

Feb 02, 2010 | 1998 Chevrolet Cavalier

1 Answer

98 chev 2500 no brake lights on box works on center of cab no turn signals on box. blinking fast on front but working hazards work on front not on rear if u apply breaks with hazards they stop working


Possible cause is the connector is disconnected and the bumper area. Main ground wire may be loose, check manual for ground location. Also the wiring loom may have been damaged between the rear lights and the front connector. The front lights will blink fast when the rear lights do not work. There could also be a problem with the turn signal switch. Check with the wiring schematics to see which wires to check for power.

DT

Sep 25, 2009 | 1998 Chevrolet C2500

2 Answers

Ford Esc 98 left signal (front & rear) not working. Hazards work


it sounds like your flasher is going out and if not that then it could be a short in the system

Aug 22, 2009 | 1998 Ford Escort

4 Answers

1999 Olds Intrigue Front blinkers don't work, bulbs are good and so are the fuses. Back blinkers do work, but blink fast. Hazards work too.


The most common cause will most likely be the turn signal/multifunction switch. Hard to confim it without testing the outputs from the switch. I have replace more than 100 on this body style of car

Jul 29, 2009 | 1999 Oldsmobile Intrigue

1 Answer

I want to replace flasher on 89 olds 88 where is it


If you mean the blinker bulb, they are either set in behind the front bumper, where you see the orange/white colored glass (directly beneath the headlights)....OR the side blinkers, which are accessed by opening the hood and reaching in from the inside.

The rear blinkers are able to be accessed by opening the hood, and removing a small (phillips head) screw on the top of the vertical tail light housing. These lights serve as blinkers and brake lights, and there are two in each housing. Hope that helps! :)

Jun 16, 2009 | 1989 Oldsmobile Delta 88

1 Answer

Front signal light Turn on but do not blink


try some electric contact lube in the light socket the leads may be corroded

Nov 18, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
1998 Oldsmobile Intrigue Logo

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...