Question about Cars & Trucks
How do I install new top?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The front seatblet retractor springs have weakened. Unfortunatly, there are no "user serviceable parts" on them. They would have to be replaced. How many miles is on it? If you have low mileage, the Toyota Customer Experience Center may provide you some assistance, as the belt replacements are quite expensive. I'd call the CEC and explain your dilemma. Here is the number: 1-800-331-4331
Posted on Sep 23, 2008
The oil filter is located under the exhaust manifold in the front of the engine on top near the radiator loosens. It can be removed by turning to the left tightens the opposite.
Posted on Jan 02, 2009
SOURCE: I have a 2001 Toyota
Happens all the time on ours. You need to take two flat blade screwdrivers and work out the fold in the
seal belt at the top and push the belt back into the slot and all will be well. It takes a few minutes of
working with it and perhaps a few choice words but
if you will keep at it and undo the fold in the belt, it will go back in. To avoid this in the future try to get in the habit of holding the buckle straight out in front of you as the belt retracts when you unfasten your seatbelt.
Posted on Jan 10, 2010
It easy ! You need a philips and flat screw driver,8" X 4" block of wood and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch panel ( aka master switch panel) with the flat screw driver and disconnect it. On the side of the door panel just above the striker is this plastic push pull typeof a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder ( driver or front passenger door) in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in two pieces. Use philips and get the only hold down screw you see out.( you may have to pry out al ittle screw cover first) Now the handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.
Next lift the plastic cover and remove the six gold bolts first(For motor and regulator) Then push the window down till you see the two bolts holding the window to the regulator .Remove them, BEFORE YOU PULL OUT THE MOTOR AND REGULATOR YOU WILL SEE TWO TANGS THAT HELP HOLD THE REGULATOR AND MOTOR TO THE DOOR MARK THE RELOCATION , NOW pull out the motor and regulator have an assistant hold up the glass while you place the two blocks of wood to hold up the window. Now order your regulator and installation is in reverse. Good luck kate. Keep me posted.
Posted on Apr 22, 2010
Tips for a great answer:
Feb 05, 2017 | 2007 Toyota Solara
Mar 06, 2016 | Toyota Cars & Trucks
Feb 15, 2014 | Toyota Cars & Trucks
Aug 23, 2011 | 2001 Toyota Camry Solara
May 20, 2011 | 2001 Toyota Camry Solara
Nov 27, 2009 | 2002 Toyota Camry Solara
Jun 03, 2009 | 2007 Toyota Solara
Mar 26, 2009 | 2002 Toyota Camry Solara
Jan 02, 2009 | 2007 Toyota Camry Solara
252 people viewed this question
Usually answered in minutes!