Question about 2004 Chevrolet Malibu Maxx
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
look at the check valve/one-way vacuum valve (located behind the rear left paneling). chances are that the valve is broken and leaking. remove the valve from the hose and replace it.
Posted on Jun 15, 2009
If you are replacing the rear pads and are trying to retract the caliper pistons here is what you need to do.
Use a piston installation tool in order to twist the brake caliper piston into the brake caliper bore.
If you do not have the tool you can retract the piston by using a needle nose plier.
Exert downward force and rotate clockwise until the piston bottoms out.
Before installing be sure the two "U" shaped slots are at 6:00 and 12:00 Oclock.
Posted on Nov 02, 2009
You will need to have the radio reset or checked out at the dealer.Ther could be a cd stuck in it.Or the radio/CD player may have be on when the battery power got to low.
Posted on Jan 11, 2010
Fixed!!! I had several problems with my wife's remote start/lock/unlock/trunk/ panic. First it stopped working, i replaced the battery to find out that the battery holder inside the remote had broken solder at two points. Went to Harbor Freight bought a solder gun for $5 and solder wire for about $2. Once home i soldered the points back together (first time i've ever soldered anything). Put the new battery in and it didn't work. I pulled the whole thing apart and took the circuit board and touched the contacts where the button would have pushed at with a piece of metal. They locked and unlocked the car. So i knew at that point that the rubber thing was jacked. i got some tin foil and 5minute epoxy. Then i clued little tiny squares on the little black Nipples where they would contact the circuit board. Waited 6 minutes and put back together. Found out that if you start the car twice with out puting the key in the ignition you can't use the remote start. After putting the key in the ignition and starting it you reset the system and can remote start again. Dealer wanted 114 for the key remote and 54 to reprogram the remote to the car. I fixed my factory remote for under $20. Hope this helps someone
Posted on Feb 06, 2010
Tips for a great answer:
Feb 26, 2017 | 2005 Chevrolet Malibu Maxx
Oct 18, 2010 | 2004 Chevrolet Malibu Maxx
Apr 24, 2010 | 2006 Chevrolet Malibu Maxx
Apr 09, 2010 | 2005 Chevrolet Malibu Maxx
Jan 10, 2010 | 2005 Chevrolet Malibu Maxx
Nov 01, 2009 | 2006 Chevrolet Malibu Maxx
Mar 22, 2009 | 2006 Chevrolet Malibu Maxx
541 people viewed this question
Usually answered in minutes!