Question about 2002 Nissan Altima

Open Question

How Do you fix the switch to the sunroof in a 2002 Nissan altima

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jschoon77
  • 55 Answers

SOURCE: DOOR WON'T OPEN FROM INSIDE OF NISSAN ALTIMA 2002 ON DRIVER'S SIDE

There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.

Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.

Hope this is helpful!!



Nissan Scope Technician- 10+ years experience in Nissan dealership

Posted on Nov 11, 2008

Ad
bunnydawg
  • 5158 Answers

SOURCE: type of motor oil for a v4 2002 nissan altima

Should be in your owners manual... but generally 10W30 will do

Posted on Jan 18, 2009

  • 383 Answers

SOURCE: replacement of a head gasket on 2.5 liter nissan altima 2002

frajogag: First off, be aware that these bolts are "torque to yield" bolts (streach bolts). What this means is that instead of torqueing the head bolts to a specific torque specification, they are torqued down to a set spec and then tightened by rotating the bolts a certain angle, like 90 degrees. and all of them are turned the same amount.
This means that the shanks of the bolts must be checked to make sure they are not too thin (or the bolt has already stretched beyond limits and is prone to snap if used)
Here is how you check the bolts. Measure the bolt using a micrometer, at the base, or within the first 13mm from the end where it threads in. Then go to about 10mm before the threads end heading toward the top of the bolt. There should not be more than a 0.23mm (.0091 inch) or less difference or the bolt should be discarded.
Torque the bolts down to 98.1Nm ( 72.ft lb)
Looking at the head from the side, so you are looking at the full length from side to side, I will number the head bolts in this fashion.
#1 & 2 are directly in front of you and in the center of the cylinder head crossing it width wise.
#3&4 are to the left of #1&2, / #5&6 are to the right of #1&2
#7&8 are to the left of #3&4 / #9$10 are to the right of #5&6
Now, you have the sequence.
After the initial pull, back off all the bolts in the same sequence and then retorque them to 36 Nm ( 28 ft lb)
Using a torque angle wrench or having the ability to accurately judge turning angles. Rotate (clockwise) to a 75 degree angle. do this to all the bolts using the sequence I had provided.
Rotate the bolts (clockwise) 75 degrees again on all bolts in the same sequence. The proceedure is complete!

Posted on Apr 23, 2009

  • 54 Answers

SOURCE: Tune up nissan altima 2.5L model 2002

All you really need is a good set of spark plugs, this car has coil packs so no plug wires distributor caps etc.....Just remove the coil packs and install your plugs and your done. Good luck.

Posted on May 31, 2009

  • 1 Answer

SOURCE: 2002 Nissan Altima Exterior Door Handle

I seriously doubt that supergluing or even epoxying a handle back will hold at all, or hold for more then few days.
I would only suggest doing the replacement yourself if you familiar with this type of work, or has the aptitude to figure out how to do it, and have the right tools because it is NOT trivial and a number of things can be done wrong, broken or scratched.
The handle itself cannot be replaced. The outside door handle assembly (which includes the handle, the bezel with all associated springs, plastic and metal hardware) has to be replaced. Besides junkyards, which is a long shot for number of reasons, the only place where the handle assembly can be bought is the dealer. And these handle assemblies are not cheap ether. The driver side handle on my 2002 Altima broke first. I paid $60.23+tax, and they had to order it. BEFORE anyone goes to the dealer I suggest to call first, and ask them if they have it in stock. Since door handles are sold painted they will ask you for your car's VIN number so that they match the paint color.
After you pick it up, the replacement will take about an hour (if you know what you doing). The inside door panel has to be removed, it is held in place by the inside door handle and the panel is attached by a number of clips, the handle assembly is attached to the door by three bolts, to remove which you will need a socket with extension. You will also need a good flashlight so you see what you are doing.
If you are familiar how to do this type of work and plan to keep the car for a while I strongly suggest buying a factory service manual on a CD (I bought mine on eBay for under $10). It is worth its price 1000s of times over, and makes almost ALL repair work SOOO much easier.751424a.jpg73e3811.jpgd240851.jpg

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Nissan altima sunroof wont close all the way. It closes, but the rear of the window doesnt lift to create the seal at the back of the window. Any suggestions?


hi,
With the car OFF and sunroof OPEN inspect all around the sunroof's frame. If nothing found that might be in the way (rocks, twigs, etc.), turn on the car CLOSE the sunroof and see if you can push it UP while closing to 'help it'. If it works, I'd just leave it closed 'til you can take it to the dealer/shop to fix it.

Jan 15, 2015 | 2005 Nissan Altima

1 Answer

Leaky sunroof in 2001 nissan altima


there are drain pipes in the corners around the sunroof.
with the sunroof open pour some water into the channell to see if they are blocked

Dec 29, 2013 | 2001 Nissan Altima

1 Answer

The moonroof on my 98 nissan altima doesn't work


Skylight itself damage, BCM control unit fault, the line problem, sunroof motor does not work and so on all may cause skylight switch failure
auto diagnostic tool

Apr 04, 2013 | Cars & Trucks

1 Answer

2005 nissan altima sunroof


I would check my fuses, then look at the switches and it may end up being the electric motor its self. Hope this helps Chris

Jan 06, 2013 | 2005 Nissan Altima 2.5

1 Answer

My sunroof in my 1999 nissan altima stopped working, do I need to change a fuse?


It could be a fuse, the switch, a relay, the motor or damaged wiring. Even if it is just a fuse, something is wrong that made it blow. If you're not experienced with automotive or electrical repair it may be best to take the car to a qualified repair shop. Your owners manual and/or fuse box cover will tell you which fuse is for the sunroof. Good luck.

Mar 08, 2011 | 1999 Nissan Altima

1 Answer

Just bought a used 2002 Nissan Altima. Recently found the floor (rear passenger) soaking wet UNDERNEATH the floormat. The floors are not wet anywhere but there. Have taken it to various mechanically...


take off the door trim and make sure the plastic liner is stuck all round the door frame,as if the previous owner has replaced a speaker and not stuck it back.........

Jun 02, 2010 | 2002 Nissan Altima

1 Answer

2002 Nissan Altima P0720, P1574, P0420


I have a 2002 Nissan Altima. Can anyone tell me what these codes are? And how to fix them? P0420

Apr 02, 2010 | 2002 Nissan Altima

1 Answer

Sunroof won't close Nissan Altima 2002


check fuse
check if power at the sunroof motor
check for ground if good
if cannot close the roof apply 12v directly on motor 


Jul 06, 2009 | 2002 Nissan Altima

1 Answer

02 Nissan Altima Sunroof won't work


circuit tester to the switch when pressed should show a charge if no charge than bad contacts in switch ... if charge than the problem lyes in the motor by the sunroof. can make a tester from an old turn signal bulb a socket just ground 1 wire off the socket and use the other wire as test probe. if you find this info helpful please rate

Apr 19, 2009 | 2002 Nissan Altima

1 Answer

Replacing a nissan altima sunroof


it should....same body style....

Feb 03, 2009 | 1998 Nissan Altima

Not finding what you are looking for?
2002 Nissan Altima Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...