Question about 2005 Ford Ranger

1 Answer

Pcv valve please could you help me locate the pcv valve on my 2005 6 cyl ford ranger

Posted by on

  • paul erickson
    paul erickson May 11, 2010

    which 6cyl they used 2 that year

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

The pcv should be on the back side(firewall) of left(drivers) valve cover.

Posted on Oct 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check pcv valve


PCV is located on the valve cover and runs to the intake tube, take the PCV out and shake it to make sure the valve is not stuck. PCVs are usually just replaced if in question because they only cost a few dollars.

Jun 13, 2015 | 2005 Ford Ranger

1 Answer

Location of pcv valve on 2005 ford ranger 4.0


positive crankcase valve is located on the back of the valve cover on the right valve cover i believe if your looking at the engine, you will need to remove some hoses to be able to access the pcv valve, here is a diagram to helpnissankid88_1.gifnissankid88_2.gif

Sep 13, 2011 | 2005 Ford Ranger

1 Answer

Need to locate pcv valve on 2001 ford ranger 3.0. please help


PCV valve is on one of the valve covers...
It has a 1/2 to 5/8 inch rubber or plastic hose attached to it.
Usually on the top of the valve cover, and close to one end or the other.

Aug 01, 2011 | 2004 Ford Taurus

1 Answer

Besides taking it to a real mechanic, what's the best way to get to and replace a pcv valve on a '98 Ranger 4 cyl engine?


pcv valve is a simple swap - is located on the top of valve cover towards rear- and under the air intake- you can buy a HAYES manual at a parts store- it will show how to replace the pcv vavle- book about $20,pcv $4-8 .

Jun 20, 2011 | 1998 Ford Ranger SuperCab

1 Answer

Where is the pcv valve located on a 1993 ford ranger xlt 2.3L ?


I'll do my best to explain. The PCV is located center, upper engine area, driver side of engine, between engine block and intake manifold, mounted in vacuum hose. I hope you got that and that it helps you. Good luck.

Mar 24, 2011 | 1993 Ford Ranger SuperCab

1 Answer

TRYING TO LOCATE THE PCV VALVE ON MY 2000 FORD RANGER XLT, 3.O 6 CYLINDER HELP...


it is located on the passenger side of engine. It is mounted on the valve cover and a hose runs up to the black air intake housing, it comes from the air filter to the carburator

Sep 04, 2009 | 2000 Ford Ranger SuperCab

1 Answer

Location fo pcv valve on 2001 ford ranger 4 cyclinder 2.3


I think it is in the valve cover. see illustrations from shop manual.



Positive Crankcase Ventilation System Overview The Positive Crankcase Ventilation (PCV) System (Figure 132)cycles crankcase gases back through the engine where they are burned. The PCV valve regulates the amount of ventilating air and blow-by gas to the intake manifold and prevents backfire from traveling into the crankcase. The PCV valve should be mounted in a vertical position. On some applications, the PCV system is connected to the evaporative emission system (refer to the VECI decal). located on the underside of the hood or on the radiator cooling fan shroud.

crankcase ventilation tube
d176823.gif
  1. Remove the positive crankcase vent (PCV) hose from the clips.
cc83fb4.gif

Apr 17, 2009 | 2001 Ford Ranger Regular Cab

3 Answers

Where is the pcv valve located on a 2003 ford ranger


  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Feb 27, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Ford Ranger PCV valve.


    should be on the valve cover... goes into the cover thru a rubber gromet with a vacuum hose attached.

    Robert

    Jan 26, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Where is the PCV Valve Located ???


    okay i'm not 100% sure but it should be on top of the vavle cover or near the intake

    Jan 19, 2009 | 2003 Ford Ranger Regular Cab

    Not finding what you are looking for?
    2005 Ford Ranger Logo

    Related Topics:

    353 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    61037 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Fordexpert

    Level 3 Expert

    5331 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...