Question about 2001 Chrysler Town & Country
This can be cause by many things... (Mainly by a faulty EGR valve) or bad exhaust. If you haven't found a fix yet... Are you able to stop by an Auto Zone or Advance Auto Parts? If so, ask them to place a code reader onto your OBD reader. Let us know if there is a code, or if you need more help.
I look forward to helping you out
Posted on Mar 08, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Where is the factory amp
The amp relay is in the Relay/Fuse box located under the hood. The amp relay is the one labeled NBS which stands for Name Brand Speakers.
If you are trying to install an after market radio in a 2001 Chrysler Town and Country, you may notice that no sound comes from the speakers. This is because the single wire that is connected to the factory radio sends a signal to the Bus which tells the relay to turn on - powering the factory amp.
I bypass this by running a wire from the red Acc power wire on the radio to the relay. Connect the wire to pin number 87 on the relay. When standing in front of and facing the van, pin number 87 is the pin, on the NBS relay, which is closest to you and furtherst right.
Are you looking to replace the amplifier? or bypass the speaker wires??
Usually factory amplifiers in vans are under the P/S Front seat. However they can be up under the dash as well (P/S).
If you're looking for it because it is not turning on - check the relay (as above).
Thanks for using FixYa - a FixYa rating is appreciated!
Posted on Jan 31, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
The input speed sensor is located directly below and a little to the right of the cooler lines that are going into the transmission. IF you are standing in from of the car, remove the air breather or anything else that prevents you from getting down in on the driver side. There are two seemingly similar plugs at 9o'clock to the rear of the motor. The one closest to the motor is the input, the one further back is the out put.
It just unscrews and you screw the new on in.
Hope this helps
Posted on Nov 03, 2009
Tips for a great answer:
Nov 14, 2015 | 2003 Chrysler Town & Country
on Mar 30, 2012 | 2007 Chrysler Town & Country LX New Cars
Apr 02, 2015 | 2001 Chrysler Town and Country
Sep 23, 2012 | 2001 Chrysler Town & Country
Aug 02, 2009 | 2001 Chrysler Town & Country
Jul 08, 2009 | 2001 Chrysler Town & Country
May 08, 2009 | 2001 Chrysler Town & Country
Oct 20, 2008 | 2001 Chrysler Town & Country
85 people viewed this question
Usually answered in minutes!