Question about 2000 Chevrolet Monte Carlo

Open Question

My 2000 monte carlo will not start i replaced ignition relay but did not help. It will not crank over at all.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: monte carlo 2001 ss 3.8 V6

is the battery good if it is shorted out it will do this or if the charging system is not working

Posted on Nov 23, 2008

  • 2 Answers

SOURCE: 2000 monte carlo, low collant light comes on when

how to replace a manifold gasket

Posted on Mar 25, 2009

  • 7 Answers

SOURCE: 2000 monte carlo transmission

Well the tag is on the backside of the transmission closer to the firewall....I imagine one is the 4t65ehd which is the heavy duty and the other is the normal non supercharged version.. What a place for it huh lol

Posted on Apr 02, 2009

  • 135 Answers

SOURCE: 2000 monte carlo how to replace water pump.last bolt

there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Posted on Apr 29, 2009

wireguy212
  • 1627 Answers

SOURCE: My headlights on my 2000 monte carlo does not work

Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank relay fuse on a 2000 monte carlo?


Look for the ing fuser or relay or main fuse

Sep 26, 2014 | 2000 Chevrolet Monte Carlo

1 Answer

Yes i have a 2000 Monte Carlo 3.4 SFI VIN E and it has been stalling after starting i had to press the accelerator to keep the rpms up to 2500 to keep the vehicle running. i have recently just replace and...


you need to use scanner equipped with live data--go to live data look for crank signal 24x--if 0--get schematics check inputs to sensor--possibly wiring issue

Oct 01, 2013 | 1997 Chevrolet Monte Carlo

1 Answer

Electrical problems


Same thing is happening right now on a 2002 Monte Carlo. When the key is simply turned to ON, all of the lights on the dash starts blinking rapidly. When I attempt to turn the car over, there is no CLICK or anything from the engine - nada. Ignition turns and the dash goes dark, as if it wants to TRY to start - but nothing happens.
But, when I press the brake pedal (and the key is just sitting in the ON position), all of the blinking lights stops flashing and just stay lit. Therefore, I changed the brake switch, thinking it might make a huge difference. Didn't really help at all. When the key is turned, you can hear the fuel pump engage and everything seems to be ready to go. But, the car won't start (it will only start when it feels like it)...hit and miss, pretty much.
Does anyone know the TRUE solution to this issue? Does the ignition need to be replaced in order to get this car to crank over

May 05, 2012 | 2000 Chevrolet Monte Carlo

1 Answer

My 2000 monte carlo will not start


You probably have a blown fusible link (between the starter cable post and the fuel pump relay), or a blown relay fuse or a bad relay. The fusible link and relay should have power always and can be checked with a 12 volt test light.

Apr 09, 2012 | 2000 Chevrolet Monte Carlo

1 Answer

2000 chevy montecarlo 3.4L, Engine cranks but dont start.


hook up vac gauge and test cranking vacumm should be at least 3 to 5 inches while cranking if not suspect plugged cat converter or timming jumped also check compresson that will tell you whatz up .

Jan 31, 2010 | 2000 Chevrolet Monte Carlo

1 Answer

98 Monte carlo Z/34 cranks immediately then cuts


start by check ignition module(controls spark) do fuel pressure check to see if pressure within specs

Oct 20, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

Hand crank 2000 Monte Carlo window


open door and put your hands flat on glass both sides and someone hit the up button and it should go up to keep out the heat, just done one like that, hope this helps you,thanks robert b.

Jun 27, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

2001 monte carlo


do you have spark if you have no spark the crank sensor is bad.do you have fuel presure now. if not check the fuses. nead more info

Nov 23, 2008 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
2000 Chevrolet Monte Carlo Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...