Question about Mercury Grand Marquis
When Ac or heater either one is on it throws hot air only
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Those look to be blend door codes you could try resetting them, does the heater make a clicking sound? If that is so the blend door actuator is bad and needs replacing.
Posted on Nov 10, 2009
SOURCE: mercury 2003 gand marquis heater
One of 2 things could be happening. #1, the valve that allows coolant to circulate thru the heater core is not functioning. #2 the door that is actuated to allow cabin air to circulate around the heater core is not functioning properly. Possible causes, linkage to the valve, or actuator not working. Also a broken valve to the heater core. A vacuum leak, or faulty actuator would cause the door not to function. You can narrow down the problem somewhat by making sure that both heater hoses have hot coolant in them. You can do this by simply feeling the hoses. If they are both circulating hot coolant, then the problem is the misdirection of air flow. To repair this, the cause will have to be diagnosed, could be anything from your dash mounted controls to an issue with vacuum or the ductwork or the door or actuator. If not in the controls, the dash may have to come out. Good Luck, I hope this is helpful!
Posted on Nov 18, 2009
Testimonial: "thank you it is clear we will do the daIGNOSTIC "
SOURCE: 2003 mercury grand marquis LS
The blend door is stuck in cold position. That usually happens because the blend door actuator has failed.
You will need to test and replace the blend door actuator.
To replace the actuator you will need to take apart the dash and remove completely the instrument panel,d isconnect the connector, remove the four screws, remove the temperature blend door actuator and replace it.
The replacement is not a job for beginners, since you have to take apart the dash to access the actuator.
Posted on Nov 18, 2009
Tips for a great answer:
Jan 13, 2016 | Jeep Cars & Trucks
Dec 30, 2013 | 2004 Chevrolet Aveo
Apr 03, 2012 | Cars & Trucks
Jul 14, 2011 | 1998 Oldsmobile Bravada
Aug 22, 2010 | Ford F-150 Cars & Trucks
Aug 11, 2010 | 2005 Nissan Altima
Feb 01, 2010 | 1996 Oldsmobile Bravada
Oct 20, 2009 | 1996 Buick Park Avenue
Jan 28, 2009 | 1994 Nissan Pickup
Jan 26, 2009 | 1998 Porsche Boxster
691 people viewed this question
Usually answered in minutes!