Question about Ford Freestar

Open Question

2005 ford freestar 3.9L PO 193 code keeps returning. Ideas?

Code has been cleared a couple of times. Van bucks a bit when the code returns.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: bucking while idling

Have the upper and lower intake manifold checked. It needs to be a cold start. 2000's are notorious for having the gaskets crack and leak. This may be causing the engine to idle rough at start-up ans somewhat disappear after warming. Winter starts can shake the steering wheel!

P.s. I had it fixed at 65,000 miles (warranty), and am having it fixed again at $120,000 miles.

The Juicer

Posted on Jun 17, 2009

  • 32 Answers

SOURCE: 2005 ford freestar wont start

Check the battery. If the battery is weak all you will hear is the starter soliniod clicking. Make sure that all of the cables have good clean tight connections.
Most Auto parts stores can test your battery to see what shape it is in.

Posted on Sep 19, 2009

  • 10 Answers

SOURCE: where is the fuse for

IT IS IN THE ENGINE COMPARTMENT IN THE FUSE BOX ON THE RIGHT HAND SIDE AND THE FUSE IS TOWARDS THE BACK OF THE BOX ON THE LEFT SIDE OF IT IN THE 2ND ROW FROM THE BACK OF THE BOX AND IT IS THE 2ND FUSE OVER FROM THE LEFT IN THAT ROW. IT IS LABLED F7 AND IS A 30 AMP FUSE FOR AUXILLIRY BLOWER MOTOR RELAY. ALSO, THERE IS ANOTHER ONE IN THE FIRST ROW IN THE BACK OF THE BOX AND 2ND OVER FROM THE RIGHT AND IT IS LABLED F14 AND IS A 30 AMP FUSE FOR THE FRONT BLOWER MOTOR RELAY.

Posted on Jan 02, 2011

airjer995
  • 5332 Answers

SOURCE: I have a 2005 Ford

Sounds like you may have a misfire. Scanning the computer for codes will help you narrow down the possibilities. If it is a misfire you will see a code or codes similar to P0301 thru P0306 which are specific cylinder misfire codes. P0301 being cylinder number 1, P0302 being cylinder number 2, etc. You can then focus on those cylinders to see whether they are getting spark or the condition of the spark plugs.

Posted on Jan 19, 2011

  • 1267 Answers

SOURCE: We bought a used 2005

As with many van type vehicles, the freestar came with 16in wheels but had an option for 17 in wheels. See: http://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4SUNA_enUS250US259&q=2005+Ford+Free+star

Posted on Feb 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Ford Freester engine running but will not drive code P1000. what is the cause of this?


The P1000 code is telling you that the diagnostics scan on van was not completed after initial scan codes were cleared and/or battery was disconnected. You will need a new scan to help pinpoint the problem which seems to possibly be a transmission sensor issue. Hope this helps-please update

Nov 08, 2016 | 2005 Ford Freestar

1 Answer

Fault codes PO 193 FRP -- PO 101 MAF -- PO 380 -- PO a 09dc/dc -- PO 238 TURBO/ super charger-- PO 118 ECT -- PO 283 fuel temp sensor -- U 2023 brake sensor


101,380 and 118. These together is a no start. Take it to a garage. Just a guess, but I would be looking into the wiring. You waited to long to have a problem fixed. One bad part over time will lead to many codes. The PCM is trying to adjust to make the engine run right. Throwing other sensor out of range. Out of range pops a code.

Aug 06, 2016 | Ford Cars & Trucks

1 Answer

Po 180 1997 nissan 2.4l


Fuel Temperature Sensor A Circuit failure I would reset code
need diagnostic code reader to reset code and see if it shows back up in pending codes then look at

Here are all OBD II codes

May 14, 2014 | 2005 Ford Freestar

1 Answer

How do I turn off check engine light after fuel sensor code Po 193


After the problem is fixed and the code is erased with a scanner or code reader, the light should stay off.

Feb 04, 2013 | 2005 Mazda Tribute

1 Answer

Po316, po 300, po301, po305 2004 ford freestar


These codes are making me lean towards the ignition coil pack.My stepson's 2001 Sable 3.0 v6 had one cylinder misfiring(5-code P0305),which shares a coil with cylinder 1(code P0301).I diagnosed it by trading wire 1 and 5 at the coil,and the code changed to P0301.You have codes for the two cylinders on the same coil,so this is most likely it.(these codes would also trigger P0300(Multiple Misfires Detected) and P0316(Misfire Detected First 1000 Revs)).

Oct 14, 2012 | 2004 Ford Freestar

1 Answer

We just had new tires put on the front of our 2005 freestar and the light keeps coming on even after reseting it numerous times what do we do?


if the pressures are ok, and the reset procedure does not fix it, it is likely that one of the sensors became damaged during the tire change. you should return to the service center that changed the tires and have them check it out.

before that, check that ALL FOUR of your tires are set to 35 psi. the system works on pressure differentials (not just low pressure) so make sure ALL the tires are set equally. also note that some systems may also have a sensor in the spare tire, and can cause the light to come on also. please check the door tag on your van to confirm what the pressures are supposed to be set at. good luck!

Jun 24, 2010 | 2005 Ford Freestar

2 Answers

Fuel rail pressure sensor chkt high input p0193


how to repair a Ford Freestar fuel rail pressure sensor

Apr 30, 2009 | 2005 Ford Freestar

2 Answers

Reset check engine light 2004 ford freestar


disconnect battery overnight. It will clear codes if you don't have the scan tool. It may run rough for a few miles while it relearns your car's routines.

Please rate as fixya if this solves your issue.

Mar 12, 2009 | 2004 Ford Freestar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...