Question about 2006 Saturn ION

Open Question

How to remove and replace map lights in a saturn 2006

Push switch on driver side map light is broken. need the procedures to remove and rep[lace map lights

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 73 Answers

SOURCE: Dome Light in Saturn SL/1 Not Working

turn the key on then push in on the plungers, also twist and turn them. with the key off the light is on a timer and will not go off right away. if the key is on the light should go on and off with plunger movment.

Posted on Apr 08, 2009

  • 126 Answers

SOURCE: Saturn airbag light stays on

make sure air bag is plug ed in. if it is then you broke the clock spring .it will have to be replaced to turn light out . air bag will not work until problem is fixed .

Posted on Jun 03, 2009

  • 299 Answers

SOURCE: how do I remove the driver side window switch on a

In pull cup inside back part of switch assebly lift rubber insert (FLAP) there will be 2 screws,remove then lift in pull cup area and pull backwards.

Posted on Jun 17, 2009

  • 98 Answers

SOURCE: rattle sound front driver side wwhell

You are probably hearing the front stabilizer links going out. they are ball jointed on both ends and run to the struts. When they start to go, they thump a lot over small holes and cracks in the pavement.
Also the lower control arm bushings may be at fault, especially if you have had a fender bender. I would start with the stabilizer links (it's a do-it-yourself project) and then go from there.
A good way to check the links is to have someone rock the truck side to side while you hold the link (reach around the back of the tire and grab it) if you feel play in it or it moves too easily or is disconnected or broken, you need to replace it.

Posted on Jul 26, 2009

  • 1986 Answers

SOURCE: 2006 Saturn, passenger side mirror

Just a screw driver and a wrench or socket (actual size varies with cars)
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 Town & Country I need to remove the whole map light assembly to retrieve the white switch button that, makes the light go on, went inside so I can try to fix it.

Pull the Clear lens, They pop off. There should be screws to remove to get the assembly out. Most likely you will have to replace the assembly. But take it apart and see. That's what I do, even computers. It's already broken, doesn't work. Am I going to break it more? You just may fix it.

Dec 01, 2016 | 2006 Chrysler Town & Country

2 Answers

Anyone know how to remove the plastic dome light cover? It's the light in the center of the roof over the back of the front seats, and it is made of plastic. I tried to remove it, but if felt like the...

Use a flat-bladed tool on bezel to release tabs and gently pull down to remove the roof console. Disconnect the electrical connectors. The procedure is the same regardless of which assembly (garage door opener buttons, panoramic sunroof, etc.) you have.

Apr 24, 2014 | 2008 Saturn Aura

1 Answer

Map light broken

You could try a body shop for a second opinion.

Feb 28, 2013 | 2006 Saturn Vue

2 Answers

I have a 1995 chevy g30 that i have rep[laced disttributor , eck and full tune up still no fire or fuel any suggestions

Are you getting fuel pressure to the throttle body ?
Does the check engine light come on when you turn the key on ?
If you are not getting voltage to the fuel pump and no voltage to the coil I would check the computer to see if it is getting power then proceed in checking the fuses and relays for power. Could be something simple like the key switch or a fuseable link.

Sep 27, 2012 | 1995 Chevrolet G20

2 Answers

2005 saturn ion map light stays on

I had this happen a few months ago with my 2007 Ion! The lights would stay on and my hazards would randomly go on and off. I took it to my mechanic and all he did was adjust the knob that controls the brightness of your radio and gauges to the left of the steering wheel. It was all the way to max brightness on the right so he just pushed it over a tad and I haven't had a problem since. I guess every model of car has some kind of weird quirk

Jul 10, 2012 | 2006 Saturn ION

1 Answer

How to replace the over head map lights or the center over head reading lights

There are two types of overhead consolse on this truck. One has a storage compartment connected to the map light section, and one with a seperate removable section behind the map lights that has a lever on both sides that can be pulled down. If you have the levers, pull them both down at once and pull the section off the rail. Then insert a screw driver between the rail and the map light assembly at the rear, and gently pry down. If you don't have the side levers, insert a screw driver at the rear of the assembly and gently pry down the entire section. Once removed, press the tab down on the power connector for the wiring harness (white connector whth four wires) remove it, and remove the assembly. You will see two black connectors that hold the bulbs. Remove them by twising counter clockwise, and pull out the bulbs. Replace them with the 900 series bulb, or LED bulbs. Once the bulbs are back in place, reconnect the power connector, and gently tap the assembly back in place with the palm of your hand to reseat the clips.
Caution!, test the bulbs before you put the assembly back in place. LEDs are polarity sensitive.

Sep 23, 2011 | 2006 Honda Ridgeline

1 Answer

2006 saturn ion dome light goes on by itself and

When this happened to mine it ended up being a bad door switch. The alarm, dome/map lights and electric door locks are all connected to the door switches. It cost $65 for diagnosis, parts and labor at Saturn of South Burlington VT

Jan 05, 2010 | 2006 Saturn ION

1 Answer

Power window broken

no, drivers side is a master switch and cannot be switch.
you need to make sure it isn't a motor or regulater.

May 28, 2009 | 2006 Saturn L300

1 Answer

How do I replace the windshield washer nozzle on the 2003 Saturn Vue? I went to the dealer and purchased part number 22722205 but need to know how to remove the broken part and install the new part.

Open Hood,Remove 4 push pin retainers,remove wiper arms.If it's the pass side you will not need to remove wiper arms.Driver's will need arms removed

Apr 23, 2009 | 2003 Saturn VUE

2 Answers

Replacing dashboard lights on an 2000 Oldsmobile Silhouette Van?

the light bulbs are not replacable unless you can solder, you have to replace the complete instrument cluster, get one from a junk yard 100 bucks.

Jul 24, 2008 | 2000 Oldsmobile Silhouette

Not finding what you are looking for?
2006 Saturn ION Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides