Question about 1996 Oldsmobile 88

1 Answer

Replacing the hazard flasher

Where do I locate the flasher? Which panel do I remove to locate it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Check under the dash on the drivers side of your car there should be two pannels that can be removed and your flashers should be there, there should be two flashers one for your turn signals and one for your 4 ways ( hazard lites ). I hope that this solves yur problem and that you take the time to rate this response. Good luck. Let me know if yourequir further assistance.

Posted on Oct 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is flasher location on 2004 cadallic deville and how do you get to it


Your vehicle has a turn signal/hazard flasher module.
Remove the left knee bolster. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
showgif.do?image=520017

tif.gif

Remove the turn/hazard flasher module (1). Disconnect the electrical connector.
yicfxererercshudbsrererexehjpaiiiiiiiiuharerereretehzdai4iiiiiiubasebererererdcai8iiiiiiujcsobfrerererccam8iiiiiiiicygbfxererercsek8ciiiiiiii6ebf5ererermsfkmcliiiiiii4ebj4ererererf0iclyiiiiii4kji4everererfwicbyiiiiiiigliyexerererfxetx69p8a7tyq7crxc80aaaaasuvork5cyii=

Jan 31, 2016 | 2004 Cadillac Deville

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

My turn signals and emergency flashers work some time where is the turn signal flasher relay located and how do you detach it?


For 1998 Ford Truck Explorer 4WD 4.0L EFI SOHC 6cyl the Flasher is located in front seating area, driver side, behind dash, mounted on steering column.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.

Hope helps.

Jan 26, 2011 | 1998 Ford Explorer

2 Answers

Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

Jul 15, 2010 | 1992 Mazda B-Series

1 Answer

99 ford contour hazard flasher unit where is it


Flashers - REPLACEMENT

Turn Signal Flasher
(see Figure 1)

e21631a.jpg

Fig. 1: The turn signal flasher is located on the multi-function switch in the steering column
  1. Disconnect the negative battery cable.
  2. Remove the upper and lower steering column shrouds.
  3. Pull the flasher from the back of the multi-function switch.

To install:
  1. Install a new flasher in the multi-function switch.
  2. Install the column shrouds.
  3. Connect the negative battery cable.

Hazard Warning Flasher
  1. Disconnect the negative battery cable.
  2. Remove the knee bolster panel from the underside of the driver's side of the instrument panel.
  3. Grasp and pull the flasher from the connector located near the top of the steering column.

To install:
  1. Install a new flasher in the connector.
  2. Install the knee bolster panel.
  3. Connect the negative battery cable.

Hope this help (remember comment and rated this).

Apr 02, 2010 | Ford Contour Cars & Trucks

1 Answer

Fix a flasher


Replacement The turn signal flasher is located under the dash either to the left or right of the steering column on most models. The lower dash panel may have to be removed to gain access to the unit. The hazard flasher is located in the fuse block.On 1980 and later models, both the turn signal flasher and the hazard flasher are located at the lower left hand and the upper right hand corners of the fuse block respectively. Remove these by pulling them from their connectors.


Mar 06, 2010 | 1986 Oldsmobile Cutlass Supreme

3 Answers

Where does the flasher go on a 98 chevy malibu


Replacement The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.
  1. Remove the bezel from the ignition switch.
7f58edd.gif
Remove the bezel from the ignition switch

Carefully remove the instrument panel accessory trim plate.

9f5c3cc.gif
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .

bd28884.gif
. . . then gently pull the accessory trim plate away

Detach the electrical connector from the hazard warning switch.

daa6205.gif
Unplug the electrical connector from the hazard warning switch . . .

Unfasten the screw securing the hazard warning switch and remove the switch.

c506713.gif
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle


Installation is the reverse of removal.

Dec 01, 2009 | 1998 Chevrolet Malibu

4 Answers

Flasher location


I believe the hazard/flasher relay is located under/left of the dash . I think if you remove the under panel under the steering column it should be attached to the BCM bracket under the dash on the left side.

Remove the left instrument panel (IP) insulator.
Remove the steering column filler panel.
Slide the hazard and turn signal flasher to the right, releasing the tabs from the Body Control Module (BCM) bracket.
Disconnect the electrical connector from the hazard and turn signal flasher.

Hope this helps.....

Apr 29, 2009 | 2003 Pontiac Grand Prix

1 Answer

Need to locate signal light flasher 2001 dodge intrepid


If you mean the flasher, which makes the turn signals and hazards to blink, then...

It's a combo flasher which operates both the turn signals and the hazard lights. To access the combo flasher with ease remove the drivers knee bolster and then remove the brake release cable end from the handles notch, then disconnect the harness from the trunk release switch. Next there will be a reinforcement panel, remove that as well. Finally locate and replace the combo flasher from behind this panel. It is a black box that has a harness connected to it with a pink wire, a black and yellow wire, a red wire, a dark blue and pink wire, and finally a black wire. To help locate the flasher either turn the turn signal on or apply the hazards and listen for its location.

Apr 17, 2009 | 2003 Dodge Intrepid

2 Answers

Location of flasher for turn signal


  1. Access the COMBINATION Turn Signal and Hazard INDICATOR FLASHER on the Left-Hand (drivers) side of the instrument panel in the fuse junction panel.
  1. Remove turn signal flasher/hazard indicator flasher by pulling indicator flasher straight out.
  1. To install, align the terminals of the flasher and press into place.
How about a picture--

388df46.gif

Oct 03, 2008 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...