Question about 1995 Plymouth Acclaim

1 Answer

1995 Plymouth Acclaim Cylinder Head Removal

I need to know how to remove the cylinder head on a 1995 plymouth acclaim. it almost looks like you would have to remove the moter-mount on the passenger side to get to it...help please....

Posted by on

  • sylvrshaddow Oct 26, 2008

    2.5 Liter, 4-cylinder ... does that help... I am a total dummy when it comes to cars.... so please help

  • OldTech1970 May 11, 2010

    what size engine??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Honestly... If you are really not that good at mechanical issues you probably should take it in... Not to be mean but the head needs to come off in a bolt sequence and reinstalled in a bolt sequence with the correct torque... The passenger motor mount,exaust,wire harness,valve cover,head boltscoolant hoses,throttle cable and many more items need to be removed......Also NOTE:... slip and tuck head gasket jobs are NOT advisable and ussually result in doing the job twice over..... The heads have a tendency to warp and also crush in the gaskets over time....The head should be checked for warpage. Also a good time to do the valves and replace seals.......in the end if you are not experienced and do not have someone around that knows aboput the job at hand you may want to have the job done by a tech... For fun grab yourself a Chiltons manual and read through........

Good luck

Robb

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cam snapped in half. on my 1994 ply. acclaim. and there is only fifty lb's of compression in #1 cylinder, and a major leak in cylinder # 2.


With the cam in 2 pieces it is a sure bet that the half that is not moving will have bent valves from the piston hitting them. It likes a head off for valve replacement

Feb 27, 2013 | 1994 Plymouth Acclaim

1 Answer

The timing belt on our 1993 Plymouth Acclaim just broke. Do we need to replace the water pump and the valves when we replace the timing belt? The guy at the garage says the valves are full of gunk!!


well this is what you have to do send the cylinder head to a machine shop for any internal damage check any bend valve install a new water pump new timing belt and problem solve

Jul 13, 2012 | 1993 Plymouth Acclaim

1 Answer

Have very poor heat in my 1992 plymouth acclaim don't know why


That can be caused by a number of things. It could be a bad engine coolant thermostat. It could be low engine coolant due to a leak. It could be a clogged-up heater core. It could be a bad water pump. It could be a blown head gasket....the problem needs to be diagnosed before anyone can tell you exactly WHY you have poor heat. (Although many may try to GUESS and tell you to just start replacing parts without any diagnosis.)

Jan 20, 2012 | 1992 Plymouth Acclaim

1 Answer

92 Plymouth Acclaim over heats, no leaks anywhere only has 88000 miles.It also seems to need a lot of oil.


check the coolant to see if oil is mixed in it if so the head it cracked or head gasket is blown

May 20, 2010 | 1992 Plymouth Acclaim

1 Answer

Diagram for 92 acclaim serpentine belt


For the 1992 Plymouth Acclaim:
Click on the following free, direct Link. It has several Seprentine Belt Diagrams, including one to match your specific 1992 Plymouth Acclaim with the unspecified Engine: 2.5L SOHC In-Line 4-Cylinder or 3.0L SOHC V6; and the unspecified Engine Options (AC/No AC ect.)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1992/make/plymouth/model/acclaim/1992_plymouth_acclaim_drive_belt_routing_diagram.htm

Apr 17, 2010 | 1992 Plymouth Acclaim

1 Answer

Were does this connector go???!!


You marked everything when you removed them.!!! Find another similar veh and check it out.

Mar 11, 2010 | 1990 Plymouth Acclaim

1 Answer

I have a 1994 plymouth acclaim that is overheating. I need to know where the water pump is


if you have 4 cylinder engine your water pump is under the plastic timing covers and you will have to remove the timing belt because it drives the pump.if its overheating could be you thermostat or is your pump leaking?

Jan 18, 2010 | 1994 Plymouth Acclaim

1 Answer

Plymouth acclaim ignition repair


the ignition cylinder will run you about 20$ and it is fairly easy to change you can change it yourself buy the chilton book (it will help later) and it will be cheaper than paying for labor although the entire replacement will take less than 30 min

Nov 26, 2008 | 1992 Plymouth Acclaim

Not finding what you are looking for?
1995 Plymouth Acclaim Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...