Question about Fiat Punto
Found the pump/filter but not sure how to remove it
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fiat Multipla 2002
In all these cases it appear to be a problem with the synchronizers or a dented pinion. To verify, the oil can be check for metal deposits. Fiats have bronze synchronizers and when placed under heavy shifting load they were out rapidly. if this is the case replacement is the solution and transmission has to be open. The car can be driven but gear will keep releasing. Sometimes the synchronizer level bends causing an incomplete setting off the gear.
Posted on Jul 05, 2008
Firstly removve the wheel. Then romove the the caliper by the two hex/alen key screws at the rear. then remove the guard by the two bolts at the front. this should leave only the disk on the hub. there is a small screw on the front which will realease the disk and fitting is te reverasal of removal.
Posted on Jun 06, 2009
the fuel pump in the tank are well known for breaking up, if the filter keeps the fine metal filings out of the HP pump all you need is a new tank pump (they are available after market from motor factors) dont drive it until you have changed pump, fuel filter and really cleaned the casing.
Posted on Aug 14, 2009
I realise you have probably solved this problem by now so sorry for the late news mate . Had a similar prob and it turned out to be an alternator malfunction . I replace the brushes and off she went . These things send voltage from the alt . to a fuel pump relay or whatever so the pump wont run if the eng isn't (or the alt isn't outputting any voltage.) . Hope you already had it sorted . But I hope this helps if not . Cheers Simon .
Posted on Aug 15, 2009
Hi.I had problems with my uno cutting out while driving and sometimes not starting.Ok the previous problem there was a short on the wires at the ignition barrel were all the wires plug in.I cleaned the burnt area,replaced plug and problem solved.The simptoms was:Car cuts out when driving,car doesnt always start,display lights in dash are not very bright.
Posted on Nov 25, 2009
Tips for a great answer:
Aug 19, 2016 | 2007 Fiat Palio II
Mar 02, 2015 | 2006 Fiat Multipla 1.9
Jan 07, 2015 | 2007 Fiat Multipla 1.6
Sep 16, 2012 | 2005 Fiat Multipla 1.9
Jul 30, 2012 | 2006 Fiat Multipla 1.6
Dec 27, 2011 | Cars & Trucks
Sep 24, 2011 | Fiat 500 Cars & Trucks
Jun 01, 2009 | 2006 Fiat X1/9
Aug 10, 2017 | Fiat Cars & Trucks
Aug 08, 2017 | Fiat Cars & Trucks
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: