Question about 2008 Mazda Tribute

1 Answer

2008 mazda tribute abs and all wheel problem when you start the vehicle all lights are out after computer check but drive 1 km abs lights and all wheel lights comes back on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 5,332 Answers

That's telling us that the abs is passing the self check when you turn on the key. When th e light comes on after you start moving it usually means that a sensor is not sending a single or a signal is messed up. A scan tool will tell you wich wheel to focus on. It is fairly common for the exciter rings on the front drive axles to break and cause this code. It wouldn't hurt to inspect these for crackps or misalignment. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Posted on Feb 20, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: mazda tribute abs fault. abs

These vehicles have a recall on the ABS system for faulty wiring. You may want to check with your local dealer to see if your vehicle is included.

Posted on Sep 20, 2008

  • 1 Answer

SOURCE: mazda rustler 160i wheel bearings

a had sabe problem in a same model about one year.
i replaced inner and outer cv joint

Posted on Dec 17, 2008

  • 1 Answer

SOURCE: 2001 Mazda Tribute wont start

the problem is probably an idle air control valve. its a cheap fix. the body is ford the motor is mazda.
Luke

Posted on Dec 22, 2008

adve1958
  • 246 Answers

SOURCE: 2005 mazda tribute....abs problem

a speed sensor on the front,have the ABS system scaned for the codes(this will show you wich sensor is bad)

Posted on Sep 08, 2009

  • 811 Answers

SOURCE: looking for front end parts diagram for 2006 mazda tribute

buy manual, clean or replace speed sensor at wheels

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 mazda tribute 4 wheel drive. All of a sudden the abs light and brake light came on and I hear something running under the good even when the key is off. What could b wrong?


Sounds like the abs pump. Anytime a red light comes on you should not drive it. Check and see if that vehicle has ever had a recall on the abs/brake system.

Oct 27, 2014 | Cars & Trucks

1 Answer

Anti skid light


Mazda Tribute or Ford escape

If you check abs code it say a defective Wheel sensor but it isn`t

It is a crack sensor gear on axle check it is loose coast $9.00 at dealer

Apr 22, 2014 | Mazda Tribute Cars & Trucks

1 Answer

On my 2006 mazda tribute, the abs light came on, wnet off and came back on again. the car has plenty of brake fluid. . .what could be wrong?


Hello and thanks for the question,
The anti lock brakes system is somewhat complex. There are many reasons as to why the ABS lamp flashed on and the back off ( ie. Wheel speed sensors, relays, poor power supply, bad grounds). There's really no other way of telling without haveing the codes retrieved from the ABS module( computer).

Jun 15, 2011 | 2006 Mazda Tribute

2 Answers

Abs light is on and 4wd light comes on and off


2006 Mazda Tribute, ABS braking lights on,Why?
While driving the ABS light comes on and stays on and when I apply the brakes it kinds of shakes a bit.
How to fix this problem?

May 30, 2011 | 2006 Mazda Tribute

1 Answer

Had new front brake pads and rotors installed last week. Get grinding noise in reverse when first starting out then it goes away. ABS light and 4 wheel drive light come on and flash. Brakes work fine, what...


First have the brakes checked, the abs and 4wd lights need to be checked, this is done with a scan tool, the computer stores codes telling you what part of what system has failed this will help in finding the problem, the noise my be a bad wheel bearing and has gotten bad to the point it has damaged the abs sensor and has made the lights come on , this is a guess you will need to have the computer scanned to get the codes. hope this helps, good luck.

Dec 10, 2010 | 2005 Mazda Tribute

1 Answer

My abs light just started coming on last week on my 2003 Mazda Tribute. When I start it up, it'll come on and then off like it's supposed to do. After I've driven for about ten - fifteen minutes, it'll...


the sensors are mounted at each wheel. wheel removal is probably not necessary. get under the car and look where the axle meets the wheel. you should see a steel ring mounted around the axle with teeth on it like a gear. mounted in that area is the speed sensor. there will be a wire attached to it. with sensor cleaner, spray each sensor and clean with a small brush. spray again.

Mar 07, 2010 | 2003 Mazda Tribute

1 Answer

2005 mazda tribute....abs problem


a speed sensor on the front,have the ABS system scaned for the codes(this will show you wich sensor is bad)

Sep 08, 2009 | 2005 Mazda Tribute

2 Answers

Mazda Tribute 2005. 172000 km. Vibrations


Could be ball joints loose...jack up wheel and check for play
Could be bad hubs...the metal part of the tire wheel...i had this problem once..check for obvious damage like a dent or cut in metal
Could be caliper sticking
Could be mud in and around the wheels

Dec 20, 2008 | 2004 Mazda Tribute

1 Answer

Mazda tribute abs fault. abs light comes on & of when starting all ok. does not come on when driving, but you can feel the abs coming on when it shouldn't, intermittent. no fault codes, no abs light on...


These vehicles have a recall on the ABS system for faulty wiring. You may want to check with your local dealer to see if your vehicle is included.

Sep 16, 2008 | 2003 Mazda Tribute

Not finding what you are looking for?
2008 Mazda Tribute Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...