Question about 1995 Mercury Cougar

2 Answers

1995 Mercury Cougar Door Panel Removal - 1995 Mercury Cougar

Posted by on

  • Anonymous Apr 07, 2009

    asdfasdfdasfafd

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

This nearly drove me crazy on our 1994 Cougar.
First remove the electric switch cover(window and mirror controls). Just pops out with a pry. Remove the harness attachments You will see a single screw into the door holding a bracket between door pad and door frame. Remove it.
Second, remove the door lamp plastic cover at the bottom rear of the door. You will find a second screw in there on the upper right corner. Remove it and you are ready. Pull the whole door pad upward and it comes right off. No popem plastic clips or anything else. Just 3 or 4 quarter circle retainers that pop over into the door when you push the pad back down

Posted on Apr 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you take the door panel off of a 1994 cougar??

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a cooling fan in a 95 1995 cougar


I had to use a Thunderbird, which is exactly the same part and procedure. Watch the short video. 1994 1997 Thunderbird Fan Removal

Dec 31, 2016 | 1995 Mercury Cougar

2 Answers

Blower motor removal in a 1999 mercury cougar


SECTION 412-02: Heating and Ventilation 1999 Cougar Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 02/8/2001 Blower Motor Removal
  1. Remove the footwell upper trim panel (passenger side).
    • Remove the pushpins.
    m3401035.jpg
  1. Remove the blower motor.
    1. Disconnect the electrical connector.
    1. Lift the securing tab, turn the motor approximately 30 degrees counter-clockwise and remove the motor.
    m3401077.jpg
Installation
  1. NOTE: Engage the securing tab for the blower motor.

Nov 12, 2010 | 1999 Mercury Cougar

1 Answer

How is the instrument panel removed from the dash of a 97 mercury cougar problem


1997 Thunderbird/Cougar Instrument Cluster Removal
  1. Disconnect battery ground cable (14301).
  1. Remove retaining screws and instrument panel reinforcement (017A28).
  1. Remove retaining screws and instrument panel lower shield (045G02).
  1. Make sure air bag system is properly disarmed. Remove fasteners holding steering column. Gently lower steering column.
  1. Remove screws holding the instrument panel finish panel (044D70) and gently pry off.


    Instrument Panel Finish Panel

  1. Remove four instrument cluster retaining screws. (Do not remove screws from the instrument cluster main lens (10887) and instrument cluster mask (10890)).
  1. Slide the instrument cluster (10849) to the right of the instrument panel opening and disconnect the instrument panel harness from the back of the instrument cluster.
  1. Remove the instrument cluster from the instrument panel (04320).

1997 Thunderbird/Cougar Installation
  1. Follow removal procedure in reverse order.
  1. Tighten instrument cluster retaining screws to 2-3 Nm (18-27 lb-in).

Jun 01, 2009 | 1997 Mercury Cougar XR7

1 Answer

Need to remove drivers door panel


please rate if this helps. Section 01-05: Trim, Interior 1995 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION The interior trim component Removal and Installation procedures generally apply to all models. If some of the steps do not apply to the particular models being serviced, proceed to the next step. Trim Panels, Door Removal and Installation
  1. ssd~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not pry front door trim panel (23942). Prying on front door trim panel will break the hook retainers.
    Disconnect battery ground cable (14301) .
  1. Carefully pull front door trim panel finish panel (23712) away from front door trim panel .



    9e3f506.gif
Item Part Number Description 1 23713 Front Door Trim Panel Finish Panel 2 17B676 Outside Rear View Mirror Control 3 14028 Door Lock Switch 4 55928-S55 Screw (5 Req'd) 5 14529 Window Regulator Control Switch 6 23942 Front Door Trim Panel
  1. Disconnect wires from front door lock switches (14017), outside rear view mirror controls (17B676) and window regulator control switches (14529) , if equipped; remove front door trim panel finish panel.
  1. Remove front door trim panel retaining screw through front door trim panel finish panel opening.

    Trim Panels, Door


    83b257f.gif


    Item Part Number Description 1 20124 Front Door 2 23942 Front Door Trim Panel 3 383356-S100 Nut (2 Req'd Each Side) 4 56903-S58 Screw (2 Req'd Each Side)
  1. Remove interior lamp lens cover.
  1. Remove screw through interior lamp opening.
  1. Slide front door trim panel upward to disengage hooks.
  1. Rotate top of front door trim panel away from front door (20125) , and lift bottom hooks from front door.
  1. Disconnect window regulator jumper wire (14A630) .
  1. Remove front door trim panel.
  1. To install, reverse Removal procedure.

May 07, 2009 | 1994 Mercury Cougar

1 Answer

Blower motor fuse is located 99 mercury cougar


SECTION 412-04: Control Components 1999 Cougar Workshop Manual REMOVAL AND INSTALLATION Blower Motor Resistor Removal
  1. Remove the upper footwell trim panel (passenger side).
    • Remove the pushpins.
  1. Disconnect the blower motor resistor electrical connector.
  1. Remove the blower motor resistor.
-------------------------------------------------------------------------
f9d16f6.gif

May 06, 2009 | 1999 Mercury Cougar

1 Answer

Taken off door panel of a 2002 cougar


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts securing the mirror to the door

Apr 11, 2009 | 1995 Mercury Cougar

1 Answer

2000 mercury cougar front door panel removal


its very easy, takes maby 10min, there are hidden screws under the cougar symbols on the door, and under the black circles on the carpeted part of the door, they all just pop off, then there are a few on the ouside rim of the door 2 on each side i think, it might require a little jiggling but the car is pretty simple

Mar 15, 2009 | 2000 Mercury Cougar

1 Answer

Keypad entery reset


go to the dealership. 

Jan 03, 2009 | 1995 Mercury Cougar

1 Answer

I cannot get the door panel off of my 1994 cougar whats the probl


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Dec 23, 2008 | 1995 Mercury Cougar

1 Answer

1995 cougar window problem


If able pull the door skin off and clean the connections on the motor for the window if you cant get to it do what I do in my mustang ...give the door a few good whacks up towards the hinge side of door in the middle from top to bottom

Oct 09, 2008 | 1995 Mercury Cougar

Not finding what you are looking for?
1995 Mercury Cougar Logo

1,328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...