Question about 1997 Honda Accord
Is the fuse inside the engine or inside the car? i changed fuse #32 and fuse #23 in the fuse box under the hood and no change
It may not be a fuse at all, it could possibly be a bad earth or even a blown bulb. It is not uncommon to find multiple bulbs blown at the same time.
Posted on Feb 19, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The 96 Accord interior fuse box is under the dash, drivers side. Look for the small access panel with a thumb twist on it. Picture below:
Fuse location in box is #1 below:
Posted on Jul 21, 2009
Do u mean the door latch, which u pull to open the door, or the plastic molded handle u grab to shut the door? If it's the latch, there are two small round plugs in the plastic area of the door lock and locking switch. Use a small flat end screwdriver to pry them out , exposing two philips head screws. If this isn't what u needed, let me know, I'll get more info for u. countrycurt0
Posted on Oct 04, 2008
possibly your power window regulator is out. basically check the fuses first to make sure you have not blown that, if it is good, then you can order a new window regulator from the dealer or online @ autopartswarehouse.com. to replace the window regulator you will need to will need to remove the door panel, start with the screws on the handle and the arm rest, covered with a plastic cap. the door panel which can be pryed from the bottom with a flat blade screw driver or flat pry bar, it will make a snapping sound. three bolts on the regulator 4 bolts on the window tracks and 2 bolts securing the window, re assemble as you have taken apart, Good Luck!!
Posted on Sep 10, 2009
I just replaced both low beam headlight bulbs on my 2005 Honda Accord. After reading the owner's manual and trying to remove the wheel well inserts (and breaking a couple of those clips in the process), I gave up on that approach and was able to change the passenger side and driver side low beam bulbs from the engine compartment under the hood. On the passenger side, fit your arm between the front of the car and the hose that is above the headlight. You should be able to reach the bulb, disconnect the electrical connection, turn the bulb 45 degrees counterclockwise to remove it, insert the new bulb turning it 45 degrees clockwise to secure it in the hole (be careful not to touch the bulb), and reconnect the electrical connection. I loosened the 3 screws that secure the bulb to make it easier to put in the new one, but that probably isn't necessary. My hand was scraped a bit doing this, but it was not too bad. On the driver side, remove the battery hold-down clamp (there is no need to disconnect the battery connections). Reach into the fender (shine a light there so you can see the bulb connection) and you should be able to reach the bulb and replace it similarly to the other bulb. You may have to move the battery slightly to get your arm in there. Replace the battery hold down clamp when you're done. I accidentally dropped the old bulb in the wheel well, but other than that it went pretty smoothly. Good luck.
Posted on Jan 12, 2010
Tips for a great answer:
Feb 27, 2015 | 1984 Honda Accord
Jan 15, 2011 | 2007 Honda Accord Sedan
Oct 21, 2010 | 1994 Honda Accord
Apr 05, 2010 | 1992 Honda Accord
Oct 21, 2009 | 1991 Honda Accord
Oct 16, 2009 | 1991 Honda Accord
Oct 12, 2009 | 1992 Honda Accord
Mar 17, 2009 | 1997 Honda Accord
673 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: