Question about 2006 Chevrolet Colorado

Open Question

2006 chevy colorado water pump

Replace water pump

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 323 Answers

SOURCE: how to remove and replace front brake rotors chev colorado

Time to buy yourself a good shop manual. You say it is both a 2006 and a 2008.

Posted on May 12, 2009

  • 11 Answers

SOURCE: how to replace 2006 chevy colorado thermostat

find where top hose comes from the radiator into the engine block, then drain some of the coolant out and remove hose and thermostat from the block. remember which way the termostat sits in the block and install new one. its always a good idea to flush your cooling system before putting in a new thermostat. if the old one was plugged up, the gunk thats in your system will just plug up the new one in time too. you can get a bottle of radiator flush from most auto parts stores.

Posted on Aug 23, 2009

c17hydro
  • 2984 Answers

SOURCE: how do i change out the knock sensor on a 2006 chevy colorado

You didn't list your engine size so please pick the applicable to your motor size:

Removal & Installation 2.8L & 2.9L Engines To Remove:

  1. Lift the vehicle high enough to gain access to the knock sensor (KS) through the left front wheelhouse.
  2. Remove the left front wheel and wheelhouse liner.
Knock sensor (KS) (A), Engine harness (B), Knock sensor (KS) connector (C)


e44e83f.gif
  1. Disconnect the knock sensor (KS) connector.
  2. Detach the knock sensor (KS) from the engine block.
To Install:
  1. Attach the knock sensor (KS) to the engine block.
    • Tighten the bolt to 18 ft lbs (25 Nm).
  2. Connect the knock sensor (KS) connector.
  3. Install the left front wheelhouse liner and wheel.
  4. Fully lower the vehicle.

Posted on Sep 03, 2009

  • 2841 Answers

SOURCE: Replace Fuel Filter on 2006 Chevy Aveo Hatchback

If the fuel filter is mounted inside the fuel tank at the pump it does not need replacing and is a permanent filter. All you have to do it follow the fuel lines from the fuel tank to the engine. If the filter is mounted in the fuel line you will find it.

Posted on Dec 10, 2009

  • 1 Answer

SOURCE: WATER PUMP REPLACED BUT THERE IS STILL A LEAK

im having this problem now getting ready to replace my water pump i hope it is what it is if not what did u come up with thanks for youe input

Posted on Mar 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace camshaft postion actuator solenoid 2006 chevy impala


Have any codes ? Chevy Colorado P0017 Case Study Part 1 Doesn't matter if this is a Colorado . Same on impala VVT - variable valve timing .

Jul 02, 2016 | 2006 Chevrolet Chevrolet Impala LT

1 Answer

2006 Chevy Colorado - I got a significant of water in cab on flr


This happened to me. Problem is that the wiring and transercase ECM under the floor mats are not weather sealed. To fix the 4X4 ECM youll need to take up all the flooring and sound proffing. They hold a lot of water and never real dry out. Next to replace the ECM its easyest to take out the drivers seat. Four blots hold it to the floor. The black box under the seat (under the floor mates) is the ECM for the transfer case. Replace that and get the conections in the wireing dry and you should be good.

May 11, 2009 | 2006 Chevrolet Colorado

2 Answers

2006 Colorado


Check your fan clutch on water pump.(may be staying engaged) Also have cat converter checked for partial obstruction (may not be bad enough to give a performance problem yet) Both can give symptoms you posted.

Feb 05, 2009 | 2006 Chevrolet Colorado

Not finding what you are looking for?
2006 Chevrolet Colorado Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...