Question about 2010 Volkswagen Jetta SportWagen

Open Question

How do you remove the front seat in a 2010 jetta

The bolt that holds down the seat, what is it and what size is it?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: Tools needed to remove front breaks on 2002 Jetta

Yes 7mm allen socket is needed to remove the pins.

Posted on Dec 06, 2008

  • 1 Answer

SOURCE: waht size allen key to remove front brake calipers

On my Golf 1.9TDI (2005) both top and bottom Calliper fastenings have a 7mm Allen bolt thus you will need a non standard 7mm Allen Key not 12 point

Posted on Jun 02, 2009

  • 1 Answer

SOURCE: battery removal

it is on the front of the battery (toward the headlight) down at the bottom - you will need a rachet (15 mm i think) with an extension. you can push a little against the plastic cover that houses the back of the headlight and expose the bolt or you can take out the 2 black screws on the plastic headlamp cover and slide it out (takes about 45 seconds)

Posted on Jun 08, 2009

  • 112 Answers

SOURCE: what size allen wrench does it take for the

Seven millimeter (7mm)

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: removing the oil pan from a 1994 vw jetta

you have to remove the oil pan without the gasket because the gasket is attached to your oil pan baffle and that can't be removed until you unbolt your oil pump. i pried the **** out of mine until i realized the gasket couldn't come with it. no haynes manual will explain it as simple as it could be, i hate those books

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove - pop up - the back seat bottom part of a Toyota Matrix?


sit on seat hands down in front push down and back while also lifting front edge

Feb 07, 2015 | 2010 Toyota Matrix Automatic

1 Answer

Removing rear seats in a 2006 Saturn Vue


two bolts hold the front of the seat down and five bolt hold the rear.
the 2 front bolt require a E10 socket.

May 24, 2014 | 2006 Saturn Vue

1 Answer

'97 Jetta rear seat back doesn't fold.


find bolts under the front of the seat itself. remove this seat and you will see 2 more bolts at the base of the back of seat part. remove these and normally the back part lift off some retaining clips. Replace in reverse order

Jan 19, 2013 | 1997 Volkswagen Jetta

1 Answer

How to remove front seat back 2010 cts


Remove the front and rear trim covers over the four bolts that hold the seat to the floor, then go under the seat and disconnect all the wiring being careful not to break any of the connector locking tables.

Jul 12, 2012 | 2010 Cadillac CTS

3 Answers

How do i take the back off on a 1999 nissan maxima bucket seat


Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 | 1999 Nissan Maxima

1 Answer

How do you remove the drivers seat in a '98 Jetta? I want to replace it. Thanks


slide the seat right forwards and you will see, inside the runners,the bolts to remove,the runners,with the seat...after the rears slide the seat right back to see the front bolts.replacement is a reversal of removal......

Oct 30, 2010 | 1998 Volkswagen Jetta

1 Answer

My passenger front seat will not budge.ive tried everything!i have a 2001 pontiac grand am.please tell me what size the bolts are that hold the seat in.


You may have to remove the four nuts holding the seat down, remove the seat, and look for change, or debreas stuck in the track. Check the bearings, lubercate the track lightly. If the bearings are shot, or the frame/track is bent, you can try to pry it back, but it may be easier to purchase a new seat.

May 01, 2010 | 2001 Pontiac Grand Am SE

1 Answer

How do you take the driver's seat out of a 1991 jetta?


Unplug the seat belt warning plug, under the seat. You'll need to remove the right side seat track cover, it has 2 plastic inserts holding it down, push the little pin thru the insert. On the other side, at the end of the track, remove the black seat stop. Then at the front of the seat, on the bottom, in the center of the seat, there is a small seat track, at the front of the bracket, you will a screw and a 10mm nut. Remove them, lift up the seat lever (like you were going to move the seat up or back) and slide the seat back until the seat is out of the tracks.

Mar 17, 2010 | 1991 Volkswagen Jetta

2 Answers

Removing front and back speakers in 1991 Grand Am....


There is a lot involved in replacing these speakers. You should also know that the original factory speakers are 10 ohm speakers. This means that if you replace them with new speakers (most of which are 4 ohm) you run the risk of damaging the stereo, the speakers, or both. This can also cause a potential fire hazard in your car. If you want new speakers, you really should look at installing a new stereo as well.

To get to the back speakers, you will need to remove 2 bolts located under the front edge of the rear seat (bottom). After you remove the bottom, you will need to remove the rear seat (back). This involves removing the bolts that hold down the rear seat belts, which is a large sized torx bit (T-45, T-47, or T-50... Don't remember which). After removing these, lift straight up on the seat back to remove. Now remove the deck brake light housing, and the bracket that holds it. Now the deck cover can be removed. Be careful not to bend it too much getting it out from under the side trim on both sides.

For the front speakers, you must disassemble a good portion of the dash. Remove the screw holding the light switch and the wiper switch housings. This screw is underneath each housing. Once removed, there are dash mounting screws behind them. These screws (and many of the other dash screws) are a smaller torx-bit (T-10 or T-15, don't remember which). Sometimes they use a 7mm bolt. There is a cover panel just above the glove box. This panel is held on with 2 screws located in the glove box. After removing this panel, you will find 2 or 3 bolts holding on the dash. Last but not least, you will find 2 bolts inside each of the defroster vent grilles. These grilles just snap out for easier access to the bolts.

1991 Pontiac Grand Am Car Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger: Pink
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 4" Round
Car Audio Front Speakers Location: In Dash
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: 6" x 9" Oval
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Nov 30, 2008 | 1991 Pontiac Grand Am

Not finding what you are looking for?
2010 Volkswagen Jetta SportWagen Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...