Question about Oldsmobile Silhouette

Open Question

Location for shift solenoid for a 1997 oldsmobile silhouette van

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 119 Answers

SOURCE: ECM location 1998 Oldsmobile Silhouette

On the 98 Silhouette, the PCM should be located in the air filter housing.

Posted on May 21, 2008

keemo68
  • 1263 Answers

SOURCE: Replacing dashboard lights on an 2000 Oldsmobile Silhouette Van?

this will take some time but is fairly easy. you have to remove the dash pieces on that side. then this will allow you access to the instrument cluster. becareful not to wear clothing that will give off a static discharge this could short out the cluster board. the bulbs are tiny so be careful while rep-lacing them. the bulbs can be purchased at a local store the bulbs are a 194 or a 1893 in most cases.

Posted on Aug 27, 2008

alicantecoli
  • 22095 Answers

SOURCE: shift solenoid

sorry only manuals sold in spain,havent a clue

Posted on Dec 12, 2008

  • 8 Answers

SOURCE: Code Reader reads Shifter Solenoid Stuck or Off

The Shift solenoids are located in the transmission oil pan. I would recommend replacing both shift solenoids while you're in there. Also replace the filter and pan gasket. The shift solenoids are located towards the rear of the valvebody and will be identical to each other. They are held in place by a retaining clip which is easily removed with a small screwdriver or similar tool. Care must be taken as parts may fly out of the bore when the solenoids are removed. Hope this helps.

Posted on Feb 10, 2009

  • 238 Answers

SOURCE: can I change the shift solenoid 1-2 (code P0753)

The shift solinoids are mounted to the valve body which is behind the side cover of the transmission. Usually you have to lower the trans to remove the side cover, which envolves lowering the subframe. If you drop the subframe the steering rack must be disconnected and the engine must be held from above because most of the motor/trans mounts are on the subframe

Posted on Jan 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oldsmobile 2003 silhouette can i change a transmission solenoid without having to remove the transmission


Depends on which one. Some are inside the transmission above the filter, and some are behind the side pan.

May 19, 2014 | 2003 Oldsmobile Silhouette

1 Answer

What is code P0449 for 1999 oldsmobile silhouette?


code 0449 evaporative emission control system vent valve solenoid circuit malfunction check your fuses as well as connections and power going to the solenoid see manual for location of valve

Jun 28, 2012 | 1999 Oldsmobile Silhouette

1 Answer

Transmission gear shift this loose one


shifter is loose, stuck in neutral..1999 silouhette van

Sep 06, 2010 | 1997 Oldsmobile Silhouette

1 Answer

Release cable snapped at hood release no cable


where is the hood release eyelet is located on a 2000 Oldsmobile
Silhouette van.

Feb 27, 2010 | 1997 Oldsmobile Silhouette

1 Answer

Transmission shifting hard and heater blowing cold air when idlin


heater sounds like the coolant level is low,transmission sounds like a shift solenoid sticking

Jan 31, 2010 | 2002 Oldsmobile Silhouette

1 Answer

2004 silhouette jumps in 1st gear shifting to second


Have the diagnosis performed by certified transmission shop. Possibly bad solenoid in transmission.

Jul 30, 2009 | 1999 Oldsmobile Silhouette

2 Answers

1997 Silhouette Transmission Problem


The diag port is on left side under the dash. You will need a good scan tool to get the trans data for testing pressures

Jul 16, 2009 | 1997 Oldsmobile Silhouette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...