Question about 1999 Ford Super Duty F 550

Open Question

How to replace neutral safety switch on a 1999 F550 Super Duty Truck

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 91 Answers

SOURCE: neutral safety switch....I think

The switch is located at the top of the clutch pedal assembly, above your feet. Its a little cramped, but its a simple dc two wire switch, you should be able to check it with a meter for power and to see if the switch does indeed need replacement. If thats the problem, when you see the new switch, you'll know it goes in, very easy. good luck

Posted on Aug 12, 2008

  • 1 Answer

SOURCE: fuel leaking from ford f250 1999 super duty v8, 7,3 truck

check the high pressure return line behind the fuel filter the clamp securing it will vibrate and rub a hole in the line. i was quoted a couple of hundred to replace the line, i put a small piece of fuel line over the hole and secured it with a worm gear clamp. no leaks in over 2 years

Posted on May 05, 2009

  • 64 Answers

SOURCE: 2000 f550 super duty 7.3 diesel p0717 and p0715

no they are not glow plug codes, from the look of them you have a trans speed sensor wiring issue, i can not point you down the trans road that's not my specialty but try finding the sensor and trace the wires back to have a look. P0715d TSS Sensor Circuit Malfunction Fault
P0717d TSS Intermittent Failure

Posted on Jul 31, 2009

  • 4369 Answers

SOURCE: how to repair clutch pedal safety start switch on

Clutch Pedal Position (CPP) Switch
The clutch pedal position switch (CPP) is controlled by the clutch pedal. Depressing the clutch pedal manually closes the CPP switch and allows engine cranking. The CPP switch will also deactivate the speed control system.
--------------------------------------------------------------------
303-14A: Electronic Engine Controls — Gasoline Engines 1999 F-Super Duty 250-550 Workshop Manual
REMOVAL AND INSTALLATION Clutch Pedal Position (CPP) Switch Removal

  1. sxo~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.
    Disconnect the battery ground cable; refer to Section 414-01 .
  1. Disconnect electrical connector from clutch pedal position switch (CPP) (9A837).
  1. Release the clutch pedal position switch (CPP) (11A152) from the orientation clip.
  1. Remove the plastic retainer.
    1. Push the lock tabs together.
    1. Slide the plastic retainer off the clutch pedal position switch.
  1. Remove the clutch pedal position switch.
Installation
  1. Follow the removal procedure in reverse order.

Posted on Feb 06, 2010

arauzvictor1
  • 466 Answers

SOURCE: I need the wiring schematics for a 1999 Ford F250

You need to specify that if the diagram engine or that. Thanks

Posted on Mar 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Truck will not start, has lights, radio. But if I jump solenoid, it will start. replaced solenoid same thing as before. THIS IS A F-150, SORRY I PUT F-450


I had the same problem with an old car. Was a defective battery, one cell was dead. Replaced battery, all was fine.

Sep 24, 2015 | 1999 Ford Super Duty F 450

1 Answer

Brake lights not working on 2004 ford f550 . cannot seem to find fuse list for truck.


try using 12v light conect to ground touch each side of fuse if light comes on fuse is good,you can also check brake switch at pedal.

Aug 21, 2011 | 2004 Ford Super Duty F 550

1 Answer

I have a 99 ford F550, and have replaced the clutch on it 3 times in the last 5 months. I do not understand why it keeps going out. This issue has been very frustrating and expensive. Is there an...


many clutch issues and I take it you are referring to a slipping clutch originate in a faulty clutch master cylinder where the compensating port is blocked
if you have not fitted a new clutch master cylinder try that
another thing is that an f550 is a heavy duty truck so clutch work will require a flywheel machining and a heavy duty clutch pressure plate not an every day clutch kit

Jun 23, 2017 | 1999 Ford Super Duty F 550

1 Answer

Have trouble finding park or nuetral gear with shifter on coloum in order to start engine.


It sounds like your safety neutral switch. Put the truck in park and pull the shifter towards you and try to start it. That usually engages the neutral switch. You will need the switch replaced

Oct 06, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

How to repair clutch pedal safety start switch on Ford Truck F550, 1999


Clutch Pedal Position (CPP) Switch
The clutch pedal position switch (CPP) is controlled by the clutch pedal. Depressing the clutch pedal manually closes the CPP switch and allows engine cranking. The CPP switch will also deactivate the speed control system.
--------------------------------------------------------------------
303-14A: Electronic Engine Controls — Gasoline Engines 1999 F-Super Duty 250-550 Workshop Manual
REMOVAL AND INSTALLATION Clutch Pedal Position (CPP) Switch Removal
  1. sxo~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.
    Disconnect the battery ground cable; refer to Section 414-01 .
  1. Disconnect electrical connector from clutch pedal position switch (CPP) (9A837).
  1. Release the clutch pedal position switch (CPP) (11A152) from the orientation clip.
  1. Remove the plastic retainer.
    1. Push the lock tabs together.
    1. Slide the plastic retainer off the clutch pedal position switch.
  1. Remove the clutch pedal position switch.
Installation
  1. Follow the removal procedure in reverse order.

Feb 06, 2010 | 1999 Ford Super Duty F 550

2 Answers

The battery will not charge and the dash instrument cluster will not work. we have checked all the fuses and none of them are blown. its a 2005 ford f550


It sounds like you have a fuseable link that has melted... Check down by the starter... There may be another connector and main power terminal in the left side of the engine compartment but remember when you look inside the engine compartment it will be on your right....

Oct 08, 2009 | 2005 Ford F 350 Super Duty

1 Answer

Ford truck 1998 cube. Fuse diagram ?


Your title said 1999 Ford F550. Here's the link to the manual for a '99 F550. Check the fuse diagrams on pages 147 - 152.

http://www.motorcraftservice.com/pubs/content/~WOXF23/~MUS~LEN/36/99f23og4e.pdf

May 02, 2009 | 1999 Ford Super Duty F 550

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...