Question about 2001 Dodge Durango

Open Question

Is there an egr valve in 2001 durango - 2001 Dodge Durango

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
freetek
  • 5568 Answers

SOURCE: Location of EGR valve on 2005 Dodge Durango

If I had been him, I would have talked you into a Chilton or Haynes manual for your car. They are easily detailed enough to show you the location and  Iwould be surprised if a chain operation like AZ didn't have the right one on hand.

Posted on Dec 15, 2008

Ad
  • 116 Answers

SOURCE: egr valve dodge durango

if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.

Posted on Apr 24, 2009

  • 630 Answers

SOURCE: 2001 Stratus: where is the egr valve loated on my stratus 2001 3...

should be on the intake manifold should be a dish looking shaped part... go online and pul;l a pic of one up on a parts page to help identify... also check with Auto Zone parts house as they will give you a print out of its exact location and the part if they have it in stock.

Posted on May 06, 2010

ZJLimited
  • 17970 Answers

SOURCE: EGR Valve 2005 Dodge Durango

Check in the drivers side rear of engine take off the air housing and use 13mm. deep socket w / 3inch ext. and air ratchet to remove 2 bolts, then take tire off inner splash panel then 8mm wobble w / 24inch ext to take 1 tube bolts loosen other one and pull out as ***. Reverse to install.

Hope this help to solve it (remember rated this post).


Posted on May 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is egr valve on 2000 dodge durango


I don't think yours has an EGR valve. What was the code? Some of the smaller dodge engines had them. Fairly sure yours doesn't.

Oct 05, 2016 | 2000 Dodge Durango

1 Answer

Where is egr location on a 04 durango 4.7


, the EGR on a 4.7 is attached to the rear of the left cylinder head, instead of on the front of the right cylinder for the 5.7.

I googled this Hope it helps.

Dec 01, 2014 | 2004 Dodge Durango

1 Answer

Where is the egr sensor located on 05 durango


The egr sensor is built onto and is part of the egr valve. Depending on what engine you have depends on where the valve is located. On 5.7 engines its in the front. On 3.7 and 4.7 its in the rear of the engine.

Apr 30, 2011 | 2005 Dodge Durango

1 Answer

How to replace the egr valve on a 2005 dodge durango 5.7 hemi


Dont bother just make a seal off gasket from a coca cola can ,it will run better without the EGR valve and still pass the emmisions test with it blocked off

Apr 25, 2011 | 2005 Dodge Durango

1 Answer

How do I install an EGR valve for 2005 dodge durango?


To install the EGR Valve on a 2005 Durango first it is necessary to remove the air intake hoses and palce them to the side. Next, in order to get the EGR valve you will need to remove the windshield wiper motor, which is a pain but necessary to do get to the EGR valve. After removing all of the itemsthat are in the way you will be faced with a task that will try your patience, the EGR valve is located on the right side of the motor, (as if you were facing the motor from the front) just behind and to the rear of the throttle body. After you locate it you will need a rachet with a flexible head because it is fairly difficult to reach otherwise. A mirror and light will also help so you can see what you are doing since the EGR valve is located in such a hard place to see and get to that you will only be able to see part of it while you are removing the screws. After removing the EGR valve, simply reversethe procedure and your done. P.S. I own a 2005 Dodge Durango SLT with a 4.7L engine and I replaced mine this year after a check engine light came on and I checked the code on the OBD. By the way the EGR valve is a pain in the rear to change. Good luck!

Jun 29, 2010 | 2005 Dodge Durango

1 Answer

How many egr valves are on a 2004 durango


Should be just 1 . What engine do you have?? The EGR on my 5.7L Durango is on the front of the passenger side of the engine.

Apr 18, 2010 | 2004 Dodge Durango

1 Answer

Where is the EGR Valve on a 2004 Dodge Durango Limited, V8, 5.7L Hemi? Is a hard operation to replace?


Have not replaced the EGR on my 04 Durango as of yet, but if you look into the the passenger side front fenderwell you will see part of it. Usually 2-4 bolts and the harness connector are all that is required.

Chrysler EGR valves are not known for their reliability.

Don

Apr 14, 2010 | 2004 Dodge Durango

1 Answer

Need to locate EGR valve on dodge durango 2005


EGR VALVE LOCATED ON THE INTAKE.IT HAS A SMALL ROUND LOOKINGIT HAS A METAL FLEXIBLE PIPE THAT CONNECTS TO THE EXHAUST MANIFOLD.

Feb 01, 2010 | 2005 Dodge Durango

2 Answers

2001 4.7 dodge durango engine stalls at idle or while driving no check engine light on most the time...what is the problem ...


It could be a couple differentthings, first I would check the EGR Valve, it could be sticking open/leaking. Or it could be IAC valve (idle air control) sticking or faulty. Or it could be the MAF sensor faulty or damaged.

May 14, 2009 | 2000 Dodge Durango

2 Answers

Egr valve dodge durango


if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.

Apr 17, 2009 | Dodge Durango Cars & Trucks

Not finding what you are looking for?
2001 Dodge Durango Logo

Related Topics:

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...