Question about 1998 Jeep Grand Cherokee

2 Answers

Blinker wont work, but the hazards do

Blinker problems

Posted by on

  • 2 more comments 
  • bignugly2 Oct 26, 2008

    yes i replaced the bulb. all the other lights are working too.

  • bignugly2 Oct 26, 2008

    all the bulbs are new. they all worked until i changed the turn signal bulb. the hazards work and it is the same bulb.

  • bignugly2 Oct 27, 2008

    i found the problem. I was trying to test the blinkers while the truck was is park. Apparently they only work when the truck is in drive. Thank you for your help.

  • Loringh
    Loringh May 11, 2010

    Is this mean all blinkers are not working? What about parking lights and brake lights?

    Have you replaced the thermal flasher?


    Loringh


×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 185 Answers

Did you get the note from Oldtech1970 about the 2 thermal flashers? It could be the flasher for the turn lights


Loringh

Posted on Oct 26, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

There are two thermal flashers one for the Hazard Warning Lights and one for the Turn signal lights. It could be the flasher for the turn signals.

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazards dont work but blinkers do


Blinkers and hazards normally work on the same fuse. Sounds like the hazard switch has a problem.Get the hazard switch out and bridge the two connector wires to the switch. If the hazards then work the problem is in the switch.If it don't work you may have a problem in the wiring between the switch and the flasher relay.

May 05, 2013 | 2003 Ford F150 Regular Cab

1 Answer

My 57 S40 volvo blinkers wont work hazards do


Check your fuses, that should fix it.

Aug 17, 2012 | 2001 Volvo S40

1 Answer

Blinkers wont work have checked all bulbs they are ok ,cant identify which is the actual blinker unit, also the hazard light wont work as well.


ther is a single unit for signall ligths and hazards, the unit is faulty, but do this just for chance, press and release the hazard button few times then try again, some times it gest stuck or dirt build up, if doesnot work buy the electronic flasher

Sep 29, 2010 | 1993 Toyota Corolla

1 Answer

Why do the Emergency Flashers work when the blinker lights wont.


Could be the wiring near the rear end of the bronco on the underside. my left rear blinker went out, so after tinkering with it for hours, I noticed the hazards and blinkers are seperate wires altogether. i'd get the blinker working and my hazards would be out. well i don't know if that helps at all, but thats what my problem was, trial and erroring my lights.

Jul 07, 2010 | 1989 Ford Bronco

2 Answers

Blinker and hazard light problems


Replace the flasher relay. Sorry I cannot tell you where it is. Buy a new one so you will know what you are looking for.

Mar 02, 2010 | 2004 Saturn VUE

1 Answer

My blinkers wont work but my hazards do. 2000 Ford Explorer


CHANGE OUT THE RELAY. THE RELAY ACTS AS HAZARDS CONTROLLING THE BLINKERS TO FLASH TOGETHER. THE RELAY WENT BAD SO NOW U DON'T HAVE BLINKERS.

Dec 16, 2009 | 2000 Ford Explorer

1 Answer

My blinkers wont work but the hazards work. No fuses burnt out.


That would most likely be the switch itself. Fairly common

Aug 28, 2009 | 1998 Mitsubishi Montero Sport

1 Answer

Blinkers just stopped working changed fuses didnt work


Do the hazards work? Is it all the blinkers? If so try the flasher fuse otherwise make sure the hazard switch isn't half pressed down. Some cars you can hit the hazard switch just a little so hazards won't come on but neither will the blinkers. If it's just 1 blinker change the bulb

Aug 22, 2009 | 1998 Chevrolet Cavalier

3 Answers

2001 vw beetle blinkers wont work


your flasher module has gone bad. on the new beetles, the hazard button is the flasher. you should be able to purchase on at your local dealer for around $25-$30. 

May 04, 2009 | 2001 Volkswagen Beetle

Not finding what you are looking for?
1998 Jeep Grand Cherokee Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...