Question about Cars & Trucks
Cant find how to time engine
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 4g63 engine won't fire up
you should check the compression. its the easiest way to make sure you didn't bend valves. alot of times when the 'B' belt breaks, it gets sandwiched between the 'A' belt and crank sprocket, causing it to jump time.
Posted on Aug 10, 2008
Here is your diagram, Please leave me a FI YA comment if I fixed ya thanks http://www.2carpros.com/car_repair_information/tec_info/1998/eagle/talon/1998_eagle_talon_timing_belt_diagram_marks.htm
Posted on Dec 20, 2008
After you set your timing marks, remove the bolt from
the center of the tensioner. Remove the tensioner, and put it in a vise with small wood blocks to prevent
any damage to the tensioner. Also there may be a plug at the base of the tens. place a socket or flat washers around the plug to prevent damage. There are small holes in the push rod and housing slowly
compress the push rod to line up the two holes.
And insert a pin in the holes. this will keep the
tensioner compressed until.you're ready for it.
Also be sure to closly match the new belt and the
old one. There are two timing belts for this engine.
One is a 195 tooth belt the other is 201, if the belt
you use is a little to long, it will slip on the water
pump and cause overheat problems.
I hope this helps. Good luck.
Posted on Feb 04, 2010
Testimonial: "I thought this was the case but I was not altogether sure. Your help is great and the response excellent. Thanks"
SOURCE: timing for mitsubishi 4g63
Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has schematics on cover bolt locations; tools, procedures and warnings.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Mar 22, 2010
Tips for a great answer:
Sep 07, 2012 | Cars & Trucks
May 09, 2011 | 1994 Mitsubishi Galant
Mar 11, 2011 | Mitsubishi Galant Cars & Trucks
Fig. Accessory drive belt routing-2.0L (DOHC) engine
Fig. Accessory V-belt routing-Mitsubishi 1.5L, 1.6L, 1.8L, 2.0L and 2.4L engines
Hope helps (remember to rate this ansswewr).
Jan 05, 2011 | 2003 Mitsubishi Lancer
Sep 24, 2010 | Ford Escort Cars & Trucks
Dec 15, 2009 | 1995 Mitsubishi Galant
Aug 24, 2009 | Mitsubishi Lancer Cars & Trucks
May 09, 2009 | Mitsubishi Colt Cars & Trucks
Apr 07, 2009 | 1994 Mitsubishi Galant
Apr 06, 2009 | 1994 Mitsubishi Galant
374 people viewed this question
Usually answered in minutes!