- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are several fuses involved. I need to know which one(s). As for the taillights, the primary power source is 20A fuse 17 in the power distribution center. The tan/blk wire connects to the headlamp switch which, in park position, applies +12 volts through 10A fuse 7 in the junction block to the left tail light. The headlamp switch, in park position, also apples +12 volts through 10A fuse 23 in the junction block to the right tail light.
I need to know which fuse is blowing the instrument lights so you will have to follow up
you don`t say if its both or just one brake light out.you say the light itself is on but not if you mean tail light or what.the tail lights use a different filament in the bulb than the signal light which is the same filament that the brake light uses.if the signal light work on the rear then the bulbs are good,if just one side works then the bulb is no good on the side that doesn`t work.if the signal lights work but neither brake light works then you need to check the fuses in the fuse panel under the dash on the drivers side.if the fuses are good then it will be either a bad wire at the brake switch or a bad brake light switch,this is located on the brake pedal lever under the dash.
Check for faulty wires at the fuse block, had one fall off from the block itself from the rear, or it could be a wire break somewhere along the way.
Stop Lights and Blinkers are independant fuse.
Tail lights are on there own fuse and could be a wire break in the rear or removing the bulb and using a metre check for signal at bulb socket where trouble is, Check for disolored connections, Green in color or simular, could be a bad connection which in turn is not letting the curent to other side, Causing a short and loss of power to all remaining lights in curcuit.